Samsung 18-200mm F3.5-6.3 ED OIS User Manual

Download Operation & user’s manual of Samsung 18-200mm F3.5-6.3 ED OIS Camera Lens for Free or View it Online on All-Guides.com.

Samsung 18-200mm F3.5-6.3 ED OIS Operation & user’s manual - Page 1
1
Samsung 18-200mm F3.5-6.3 ED OIS Operation & user’s manual - Page 2
2
Using the Zoom Ring
Set the composition of the photo (the focal distance of the lens) by
rotating the zoom ring on the lens.
When you use the zoom function, focus can be slightly changed.
Adjust the focus again before you capture a photo.
Locking the zoom (See illustration D)
Set the zoom lock to keep the viewing angle of the lens constant.
To set the zoom lock, turn the zoom ring until the focal length
reaches 18 mm, and then push the switch left.
Using the Optical Image Stabilization (OIS)
Function (See illustration E)
The user can minimize the shaking of camera by using the OIS
function. Set the OIS switch on the lens to ON.
Using a Lens Hood (See illustration F)
To prevent deterioration of image quality by blocking out
unnecessary light, use a lens hood.
When you use a ash in situations where the distance between
the subject and the camera is close, the ash light may be partially
blocked by the lens or a lens hood. To ensure proper lighting,
remove the lens hood or adjust the distance between the camera
and subjects.
Using a Filter (optional)
Before putting a lter on the lens, make sure it is compatible.
Refer to "Specications" for compatible lter size.
A lter is a precise optical product. Keep away from dust, dirt,
or scratches. Also, do not try to mount two or more lters at the
same time. Doing so may deteriorate the image quality and cause
vignetting (a reduction of an image’s brightness or saturation at the
periphery as the viewing angle of the lens is hidden).
In case of a thick framed lter, the vignetting can occur with a
wide-angle lens.
Specications
Lens Name
SAMSUNG 18-200mm
F3.5-6.3 ED OIS
Focal Length
18–200 mm
Focal Length in 35 mm Equivalent
27.7–308 mm
Lens Construction-Elements
18
Lens Construction-Groups
13
Aspherical Elements
3
ED Elements
2
Angle of View
75.9°–8.0°
Maximum Aperture
F3.5–6.3
Minimum Aperture
F22
Number of Diaphragm Blades
7
Minimum Focus Distance (Wide)
0.5 m
Minimum Focus Distance (Tele)
0.5 m
Maximum Magnication
0.28X
Lens Hood
Included
Optical Image Stabilizer
Yes
Mount Type
Samsung NX Mount
Filter Size
67 mm
Max. Diameter
72 mm
Length
105.5 mm
Weight (Lens Only, Approx.)
549 g
Operating Temperature
0–40 °C
Operating Humidity
5–85 %
Specications may change without notice for better performance.
State of California Proposition 65 Warning (US only)
WARNING : This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm.
English
Before Using This Device
Thank you for purchasing the Samsung Lens. The illustrations used
in this manual may differ from the actual items. Some functions
described in this manual may not be available depending on the
camera model. Update the rmware of the camera body and lens.
Visit www.samsung.com to download the rmware.
Unpacking
Lens, Lens cap, Lens mount cover, Hood, Case, User manual
Optional Item: Filter
Layouts (See illustration A)
1 Lens mount index 2 Zoom ring 3 Focus ring
4 Lens hood mount index 5 Lens 6 i-Function button
7 AF/MF switch 8 OIS switch 9 Zoom lock switch
0 Lens information contacts
Attaching and Removing the Lens
► To attach the lens,
1
Remove the lens cap, lens mount cover, and body cap.
2
Align the red mark on the lens with the red mark on the
camera body. Then, rotate the lens as shown in the illustration
until it locks into place. (See illustration B)
To remove the lens, press and hold the lens release button, and
then rotate the lens as shown in the illustration.
(See illustration C)
Setting the Focus Method
Set the AF/MF switch on the lens to AF or MF.
Auto Focus (AF): The focus is adjusted automatically when you
half-press [Shutter].
Do not apply excessive force to the front of the lens while the
camera is using auto focus (AF). Doing so may cause the lens
to malfunction.
Manual Focus (MF): The focus can be adjusted manually by
rotating the focus ring.
Use the MF Assist function on the camera to aid with manual
focusing. Refer to your camera manual for more details.
Using i-Function
When you press the i-Function button on the lens, you can use
the
E
mode or
Z
or adjust some shooting options.
In the
E
mode, you can select scenes or lter effects that
your camera supports.
Z
allows you to zoom in on a subject
with less degradation of photo quality than the Digital zoom. This
feature is available only when your camera supports it. i-Scene
mode is available only on some camera models.
1
Rotate the mode dial to
P
,
A
,
S
,
M
, or
i
.
2
Press [i-Function] on the lens to select a setting.
Available settings may differ depending on the shooting mode.
Setting
Shooting mode
Setting
Shooting mode
E
i
Aperture value
A
,
M
Z
P, A, S, M, i
Exposure value
P
,
A
,
S
Shutter speed
S
,
M
White Balance, ISO
P
,
A
,
S
,
M
3
Rotate the focus ring on the lens to adjust the setting (or to
change the zoom rate in
Z
mode).
4
Focus and capture the photo.
To select the items that will appear when you press the
i-Function button on the lens, you can use the iFn Customizing
menu on your camera.
Available scenes or lter effects in the
E
mode may vary
depending on the camera model.
If you select
Z
, the photo resolution will vary according
to the zoom rate.
Español
Antes de usar este dispositivo
Gracias por adquirir la lente Samsung. Las ilustraciones usadas
en el manual del usuario pueden ser diferentes de los elementos
reales. Algunas funciones descritas en este manual podrían no estar
disponibles según el modelo de la cámara. Actualice el rmware
del cuerpo y la lente de la cámara. Visite www.samsung.com para
descargar el rmware.
Desembalaje
Lente, Tapa de la lente, Tapa de montaje de la lente, Cubierta,
Funda, Manual del usuario
Elemento opcional: Filtro
Diseño (Ver ilustración A)
1 Índice de montaje de la lente 2 Anillo de zoom
3 Anillo de enfoque 4 Índice de montaje de la tapa de la lente
5 Lente 6 Botón i-Function 7 Interruptor AF/MF
8 Interruptor OIS 9 Selector de bloqueo de zoom
0 Contactos de información de la lente
Colocar y retirar la lente
► Para colocar la lente
1
Retire la tapa de la lente, la tapa de montaje de la lente y la
cubierta del cuerpo.
2
Haga coincidir la marca roja de la lente con la marca roja del
cuerpo de la cámara. Luego, gire la lente como se muestra en
la ilustración hasta que se ajuste en su sitio.
(Ver ilustración B)
Para retirar la lente, mantenga pulsado el botón de
desenganche, y luego gire la lente como se muestra en la
ilustración. (Ver ilustración C)
Establecer el método de enfoque
Congure el interruptor AF/MF de la lente en AF o MF.
Uso del enfoque automático (AF): El enfoque se ajusta
automáticamente si presiona [Obturador] hasta la mitad.
No aplique fuerza excesiva sobre el frente de la lente mientras la
cámara esté utilizando la función de enfoque automático (AF). Esto
podría afectar el funcionamiento de la lente.
Uso del enfoque manual (MF): Es posible ajustar el foco
manualmente girando el anillo de enfoque de la lente.
Ajuste la función de Asistencia MF para obtener ayuda con el
enfoque manual. Consulte el manual de su cámara para conocer
más detalles.
Uso de i-Function
Al pulsar el botón i-Function en la lente, podrá usar el modo
E
o
Z
, o ajustar algunas opciones de disparo. En el
modo
E
, podrá seleccionar escenas o efectos de ltro que
la cámara admita. La función
Z
le permite hacer zoom sobre
un sujeto con una menor degradación de la calidad de la fotografía
que con el zoom digital. Esta función sólo está disponible si la
cámara la admite. El modo i-Scene solamente está disponible en
algunos modelos de la cámara.
1
Gire el selector de modos hasta
P
,
A
,
S
,
M
o
i
.
2
Pulse [i-Function] en la lente para seleccionar una
conguración.
Los ajustes disponibles pueden variar según el modo de
disparo seleccionado.
Ajustes
Modo de disparo
Ajustes
Modo de disparo
E
i
Valor de apertura
A
,
M
Z
P
,
A
,
S
,
M
,
i
Valor de
exposición
P
,
A
,
S
Velocidad del
obturador
S
,
M
Balance de
blancos, ISO
P
,
A
,
S
,
M
3
Gire el anillo de enfoque de la lente para modicar los ajustes
(o para modicar el nivel de zoom en el modo
Z
).
4
Enfoque y capture la fotografía.
Para seleccionar los elementos que aparecerán al pulsar
el botón i-Function en la lente, puede utilizar el menú
Personalización iFn de la cámara.
Las escenas o los efectos de ltro disponibles en el modo
E
pueden variar según el modelo de la cámara.
Si selecciona
Z
, la resolución de las fotos cambiará
según el nivel de zoom.
Usar la rueda de zoom
Establezca la composición de la foto (la distancia focal de la lente)
girando el anillo de zoom.
Como el enfoque se puede cambiar ligeramente gracias a la
distancia focal cambiada, se recomienda ajustarlo de nuevo antes
de hacer una fotografía si ha cambiado la distancia focal girando
el anillo de zoom.
Bloqueo del zoom (Ver ilustración D)
Ajuste el bloqueo de zoom para ajustar el ángulo constante del
lente.
Para establecer el bloqueo del zoom, gire el anillo hasta que la
distancia focal alcance los 18 mm, y luego empuje el interruptor
hacia la izquierda.
Uso de la función de estabilización de
imagen óptica (OIS) (Ver ilustración E)
El usuario puede minimizar el movimiento de la cámara utilizando
la función OIS. Ajuste el interruptor OIS de la lente en ON.
Usar la cubierta de lente (Ver ilustración F)
Para prevenir que se deteriore la calidad de la imagen bloqueando
la luz innecesaria, utilice una cubierta de la lente.
Si usa el ash en situaciones en las cuales la distancia entre
el objetivo y la cámara es corta, la luz del ash podría verse
bloqueada parcialmente por la lente o la tapa de la lente. Para
garantizar la iluminación correcta, retire la tapa de la lente o ajuste
la distancia entre la cámara y los objetivos.
Usar un ltro (opcional)
Antes de colocar el ltro en la lente, asegúrese de que sea
compatible. Consulte „Especicaciones” para ver los tamaños de
ltro compatibles.
El ltro es un producto óptico preciso. Manténgalo lejos del
polvo, la suciedad o los arañazos. No intente montar dos o más
ltros al mismo tiempo. Si lo hace podría deteriorar la calidad
de la imagen y provocar un efecto de viñeta (la reducción del
brillo o la saturación de una imagen en la periferia, ocultando el
ángulo de visión del lente).
En el caso de ltros de marco no, el efecto viñeta se puede
producir con una lente de gran ángulo.
Especicaciones
Nombre de la lente
SAMSUNG 18-200mm
F3.5-6.3 ED OIS
Distancia focal
18–200 mm
Distancia focal en equivalente a
35 mm
27,7–308 mm
Construcción de la lente -
Elementos
18
Construcción de la lente - Grupos
13
Elementos Asféricos
3
Elementos ED
2
Vista angular
75,9°–8,0°
Apertura máxima
F3.5–6.3
Apertura mínima
F22
Número de láminas del diafragma
7
Distancia mínima de enfoque
(Wide)
0,5 m
Distancia mínima de enfoque (Tele)
0,5 m
Amplicación máxima
0,28X
Cubierta de la lente
Incluida
Estabilizador de imagen óptica
Tipo de montaje
Montaje Samsung NX
Tamaño del ltro
67 mm
Diámetro máximo
72 mm
Distancia
105,5 mm
Peso (Sólo lentes, Aprox.)
549 g
Temperatura de funcionamiento
0–40 °C
Humedad de funcionamiento
5–85%
Las especicaciones pueden cambiar sin aviso previo para un
mejor rendimiento.
A
D
C
E F
B
2
3
1
4
5
6
9
7
8
0
This User Manual has been specially designed to guide you through the basic functions and features of your device.
Please read the User Manual carefully to ensure safe and correct use.
User
Manual
AD68-08137A (1.3)
ENG / SPA / FRE
SAMSUNG 18-200mm F3.5-6.3 ED OIS