Schenker XMG P504 Service Manual

Download Service manual of Schenker W703 Laptop for Free or View it Online on All-Guides.com.

Brand: Schenker

Category: Laptop

Type: Service manual

Model: Schenker W703 , Schenker XMG P504 , Schenker XMG P704

Pages: 29

Download Schenker W703 Service manual

Schenker W703 Service manual - Page 1
1
Schenker W703 Service manual - Page 2
2
Schenker W703 Service manual - Page 3
3
Schenker W703 Service manual - Page 4
4
Schenker W703 Service manual - Page 5
5
Schenker W703 Service manual - Page 6
6
Schenker W703 Service manual - Page 7
7
Schenker W703 Service manual - Page 8
8
Schenker W703 Service manual - Page 9
9
Schenker W703 Service manual - Page 10
10
Schenker W703 Service manual - Page 11
11
Schenker W703 Service manual - Page 12
12
Schenker W703 Service manual - Page 13
13
Schenker W703 Service manual - Page 14
14
Schenker W703 Service manual - Page 15
15
Schenker W703 Service manual - Page 16
16
Schenker W703 Service manual - Page 17
17
Schenker W703 Service manual - Page 18
18
Schenker W703 Service manual - Page 19
19
Schenker W703 Service manual - Page 20
20
Schenker W703 Service manual - Page 21
21
Schenker W703 Service manual - Page 22
22
Schenker W703 Service manual - Page 23
23
Schenker W703 Service manual - Page 24
24
Schenker W703 Service manual - Page 25
25
Schenker W703 Service manual - Page 26
26
Schenker W703 Service manual - Page 27
27
Schenker W703 Service manual - Page 28
28
Schenker W703 Service manual - Page 29
29
Disassembly
Removing the Secondary System Memory (RAM) 2 - 17
2.Disassembly
5. Disconnect the keyboard ribbon cable and LED ribbon cable from the locking collar socket & by using
a small flat-head screwdriver to pry the locking collar pins away from the base. (
Figure 13e).
6. Remove the keyboard and the memory sockets & will be visible (
Figure 13f).
7. Gently pull the two release latches ( & ) on the sides of the memory socket(s) in the direction indicated below
(
Figure 13g
).
8. The RAM module will pop-up, and you can remove it.
9. Pull the latches to release the second module if necessary.
10. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
11. The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it
will go. DO NOT FORCE the module; it should fit without much pressure.
12. Press the module in and down towards the mainboard until the slot levers click into place to secure the module.
13. Replace the bay cover and screws.
14. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
6
7
8
9
Figure 13
RAM Module
Removal (cont’d.)
e. Disconnect the key-
board ribbon cable and
LED ribbon cable from
the locking collar sock-
et by using a small flat-
head screwdriver to pry
the locking collar pins
away from the base.
f. Remove the keyboard
and the memory sock-
ets will be visible.
g. Gently pull the two re-
lease latches on the
sides of the memory
socket(s) in the direc-
tion indicated.
14. RAM Modules
10
11
12
13
14
f.
e.
6
7
8
13
12
g.
9
11
13
12
14
14
Contact Warning
Be careful not to touch the metal pins on the module’s
connecting edge. Even the cleanest hands have oils
which can attract particles, and degrade the module’s
performance.
10