Sun Microsystems storedge L25 Installation Manual
Download Installation manual of Sun Microsystems storedge L100 Storage for Free or View it Online on All-Guides.com.
Brand: Sun Microsystems
Category: Storage
Type: Installation manual
Model: Sun Microsystems storedge L100 , Sun Microsystems storedge L25
Pages: 40
Sun StorEdge™ L25 Tape Library and Sun StorEdge™ L100 Tape Library Installation Guide
Document 6423015-01, Ver. 1, Rel. 0
June 2002
18 Installing Drives in the Library
Installing Drives in the Library 0
This section explains how to install tape drives in the library. You will
need a TORX
®
T-20 screwdriver and a flat blade screwdriver for this
procedure.
Installing Tape Drives
in an L25
0
To install tape drives in an L25:
1 At the back of the library, use a TORX T-20 screwdriver to remove
the cover plate protecting the drive bay in which you will install
the tape drive.
2 Insert the tape drive into the drive bay slowly until the connectors
are seated (see figure 11
).
3 Tighten the tape drive thumbscrew using a flat blade screwdriver.
4 Repeat steps 1 through 3 to install another tape drive, if desired.
Figure 11 Installing a Tape
Drive in an L25 Library
Tape drive
Thumbscrew