Juniper EX2300-C Hardware Manual
Download Hardware manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual
Model: Juniper EX2300 , Juniper EX2300-C
Pages: 294
NOTE: We recommend that you use only SFP+ DAC cables purchased from
Juniper Networks with your Juniper Networks device.
CAUTION: If you face a problem running a Juniper Networks device that uses
a third-party optic or cable,the Juniper NetworksTechnical AssistanceCenter
(JTAC) can help you diagnose the source of the problem. Your JTAC engineer
might recommendthat you check the third-party optic or cableand potentially
replace it with an equivalent Juniper Networks optic or cable that is qualified
for the device.
The cables are hot-removable and hot-insertable: You can remove and replace them
without powering off the switch or disrupting switch functions. A cable comprises a
low-voltage cable assembly that connects directly into two 10-Gigabit Ethernet ports,
one at each end of the cable. The cables use high-performance integrated duplex serial
data links for bidirectional communication and are designed for data rates of up to
10 Gbps.
Table 42 on page 102 describes the cable specifications.
101Copyright © 2017, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications