AEM 30-0300 Instruction Manual

Download Instruction manual of AEM 30-0300 Controller for Free or View it Online on All-Guides.com.

Brand: AEM

Category: Controller

Type: Instruction manual for AEM 30-0300

Pages: 13

Download AEM 30-0300 Instruction manual

AEM 30-0300 Instruction manual - Page 1
1
AEM 30-0300 Instruction manual - Page 2
2
AEM 30-0300 Instruction manual - Page 3
3
AEM 30-0300 Instruction manual - Page 4
4
AEM 30-0300 Instruction manual - Page 5
5
AEM 30-0300 Instruction manual - Page 6
6
AEM 30-0300 Instruction manual - Page 7
7
AEM 30-0300 Instruction manual - Page 8
8
AEM 30-0300 Instruction manual - Page 9
9
AEM 30-0300 Instruction manual - Page 10
10
AEM 30-0300 Instruction manual - Page 11
11
AEM 30-0300 Instruction manual - Page 12
12
AEM 30-0300 Instruction manual - Page 13
13
P/N 30-0300
X-SERIES UEGO GAUGE
Bosch LSU4.9
AEM Performance Electronics, 2205 126th Street Unit A, Hawthorne, CA 90250 - Phone: (310) 484-2322
http://www.aemelectronics.com
STOP! - READ THIS BEFORE INSTALL OR USE!
WARNING:
THIS INSTALLATION MAY REQUIRE WELDING OR INTEGRATION INTO A VEHICLE'S ELECTRICAL SYSTEM. DAMAGE
TO SENSITIVE ELECTRONICS, FIRE, OR EXPLOSION MAY OCCUR IF PROPER PRECAUTION IS NOT TAKEN. IF THERE
IS ANY DOUBT, DO NOT ATTEMPT THE INSTALLATION AND CONSULT A PROFESSIONAL.
NOTE: IT IS THE RESPONSIBILITY OF THE ENGINE TUNER TO ULTIMATELY CONFIRM THE CALIBRATION USE FOR
ANY PARTICULAR ENGINE IS SAFE FOR ITS INTENDED USE. AEM HOLDS NO RESPONSIBILITY FOR ANY ENGINE
DAMAGE THAT RESULTS FROM THE MISUSE OF THIS PRODUCT.
Instruction
Manual
The 52mm (2-1/16”) AEM X-Series Universal Exhaust Gas Oxygen (UEGO) Gauge features a four digit central readout and
sweeping 24-color-coded LED display, providing immediate reference to the engine air fuel ratio (or lambda) in real-time.
The AEM gauge is ideal for all vehicles including carbureted applications and engine dynamometers. A 0-5V analog output
is included and can be used with data loggers or aftermarket ECUs including the AEM Infinity Engine Management
System (EMS). In addition, an AEMnet (CAN bus) and serial data stream are also available for logging or mixture control
purposes.
The X-Series Digital Wideband technology is US Patent #9,575,030.
Features
X-Digital Technology
Free air or resistor trim calibration modes
Fast response, 20ms typical
2-1/16" / 52mm outer diameter mounting
8.0:1 to 20.0:1 AFR / 0.55 to 2.00 Lambda
Configurable 3 or 4 digit precision display mode
Lambda, AFR, O2 % display modes with reversible
faceplate
Black bezel/faceplate supplied; Silver/white available
as optional purchase
Locking connectors
Supports vehicle/system voltages up to 16V
Supports Bosch LSU4.9 Sensor
0-5V Analog Output
AEMnet (CAN bus) Output
Serial RS-232 Output
KIT CONTENTS
PN
Description
10-0300
INST, X-SERIES UEGO GAUGE
35-0300
GAUGE ASSY, X-SERIES AFR GAUGE
-
RED INSULATED BUTT CONNECTORS (4)
35-4005
WELD-IN BUNG,02 SENSOR 1214 MILD STEEL
35-8618
NUT, KNURLED, M4x0.7 (2)
35-8614
BRACKET, X-SERIES GAUGE
35-3430
PWR/IO CABLE, X-SERIES GAUGE
35-3427
SENSOR CABLE, X-SERIES GAUGE LSU4.9
35-8617
RUBBER BAND, X-SERIES GAUGE
35-2004
SENSOR, WIDEBAND UEGO BOSCH LSU 4.9
*OPTIONAL* ACCESSORIES
PN
Description
30-0300-ACC
BEZEL, X-SERIES GAUGE SILVER
FACEPLATE, X-SERIES AFR WHITE
30-2355-200
NO WELD UEGO CLAMP KIT, 1.75" to 2.00"
30-2355-250
NO WELD UEGO CLAMP KIT, 2.25" to 2.50"
30-2355-300
NO WELD UEGO CLAMP KIT, 2.75" to 3.00"
30-2355-350
NO WELD UEGO CLAMP KIT, 3.25" to 3.50"
30-4008
WELD-IN FINNED BUNG, O2 LONG, STAINLESS STEEL
35-4001
BUNG PLUG,02 SENSOR