AMF SOUNDMOSAIC Technical Information Installation Instructions

Download Technical information installation instructions of AMF SOUNDMOSAIC Speakers for Free or View it Online on All-Guides.com.

Brand: AMF

Category: Speakers

Type: Technical information installation instructions for AMF SOUNDMOSAIC

Pages: 6

Download AMF SOUNDMOSAIC Technical information installation instructions

AMF SOUNDMOSAIC Technical information installation instructions - Page 1
1
AMF SOUNDMOSAIC Technical information installation instructions - Page 2
2
AMF SOUNDMOSAIC Technical information installation instructions - Page 3
3
AMF SOUNDMOSAIC Technical information installation instructions - Page 4
4
AMF SOUNDMOSAIC Technical information installation instructions - Page 5
5
AMF SOUNDMOSAIC Technical information installation instructions - Page 6
6
TECHNICAL INFORMATION / INSTALLATION INSTRUCTIONS
AMF SOUNDMOSAIC
TV_701e 09-2007 Sound Mosaic 1
GENERAL INFORMATION
The newly developed AMF SOUNDMOSAIC is a flat-panel (membrane) loudspeaker in
modular ceiling format and works on the principle of wave conversion. As such, the mineral
fibre ceiling tile itself works as the loudspeaker, the stimulation (oscillation) is effected by the
SOUNDMODULE on the reverse of the tile which therefore does not differ optically from the
rest of the AMF ceiling. As a result the AMF SOUNDMOSAIC is available in all classic
THERMATEX surfaces.
AMF SOUNDMOSAIC
One main component is the SOUNDMODULE,
which as the source of oscillation
simultaneously constitutes the most important
element of the component assembly. To
optimize the effect of the surface-emitted
sound, the adjoining tiles are integrated and
linked to each other by common ceiling tile
clips.
DESCRIPTION OF ASSEMBLY
The mechanical installation of the
SOUNDMOSAIC is like that of any AMF mineral
fibre ceiling tile. For the correct installation
please refer to the installation instructions for
AMF System C. For an ideal emission of sound
we discourage its use as a perimeter tile. Its
installation should be done at least in the
second (ideally at least in the third) row from the
perimeter.
Please avoid the connecting cable resting on the
reverse of the ceiling tiles which might give rise
to unwanted vibrations.
The individual tiles are to be connected to each
other by clips (at least two clips for each tile
edge). Consequently, nine AMF ceiling tiles are
interconnected to each other in total, i.e.
besides the centrally arranged
SOUNDMODULE a further eight circumferential
tiles.
Number of clips required for each
SOUNDMOSAIC: at least 24 pieces.
Image 1
Image 3
Image 2