AMK DT64-B Installation Manual
Download Installation manual of AMK DT64-B Speaker, Speakers for Free or View it Online on All-Guides.com.
1
2
3
4
This set up guide contains installation instruction of the AMK DT64-B series
of AMK’s Dante System enabled network self amplified speaker. This
speaker is designed to use in plenum rated ceiling spaces and can be
dropped into standard square (2’ x 2’ or 600mm by 600mm) or rectangular
(2’ x 4” or 600mm by 1200mm) false ceiling tile space with a tile bridge.
Important Safety Instructions.
WARNING: May result in serious injury. Installation and service must be
performed by authorized personnel only
1. Read these instructions
2. Keep these instructions
3. Heed all warnings
4. Follow all instructions.
5. Do not use this speakers near water
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with
manufacturer’s instructions.
8. Do not install these speakers near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Use only attachments/accessories specified by manufacturer
10. If the speakers have not been used for some time, unplug the
speakers. Or when there is a lightning storms, please unplug the
speakers for safety.
Parts Check List.
2x2 lay in PoE+ self amplified network speaker (1)
2x2 lay in companion speakers (3)
Handy Box Covers (5)
12407 Mukilteo Speedway, Ste. 130
Lynnwood, WA 98087
p. 800.438-4026 f. 877.721.8107
tech@amkspeakers.com
www.amkspeakers.com
Installation Manual
DT64-B
Dante System Network Enabled Speaker