Confirm the language update by clicking ‘change’ in the dialog box
Your switcher will restart with the new language loaded and a dialog box will appear confirming
the switcher has been updated.
Connecting Video Outputs
Video Outputs
There are multiple video outputs on your ATEM switcher which can be used to connect to a
wide range of video equipment. ATEM Production Studio 4K models include Ultra HD, HD and
SD via SDI and HDMI. ATEM Production Switcher models, excluding ATEM Television Studio,
include analog component and composite video outputs, so you should be able to connect to
equipment at any location. Descriptions of each output connection are listed in this section.
SDI Program Output
This SDI output switches between Ultra HD, HD and SD. It outputs the main program video output of
your ATEM switcher and can be connected to any SDI based video device. The audio on this output
can use embedded HDMI and SDI audio from your cameras as well as external audio via the
switcher XLR inputs. ATEM Production Switcher models include a breakout cable for external audio.
HDMI Program Output
Similar to the SDI program output, this output switches between Ultra HD, HD and SD. It outputs
themain program video output of the switcher and can be connected to televisions, video
projectors or even Blackmagic Design’s H.264 Encoder or HyperDeck Shuttle. The audio on this
output can use embedded HDMI and SDI audio from your cameras as well as external audio via the
switcher XLRinputs. ATEM Production Switcher models include a breakout cable for external audio.
Multi View SDI and HDMI Output
The multi view outputs on all ATEM switchers are HD except for ATEM 2 M/E Broadcast
Studio4K, which are HD or Ultra HD. On ATEM 2 M/E Broadcast Studio 4K you can choose from
a selection of multi view output formats and frame rates. This feature increases compatibility
with a wider range of monitors, plus you can output your multi view in Ultra HD even if you are
working in regular HD. Refer to the ‘using ATEM Software Control’ chapter, multi view settings
section for more information.
Some models of ATEM switchers include a single multi view, while bigger models include
2independent multi views so you can monitor more switcher sources. Each multi view includes
8 video input views, with preview and program views.
Tally is included with red for sources on air, and green for preview. You can connect this output
to televisions and computer monitors with SDI or HDMI connections.
3131