Fluke 717 1G Instruction Sheet

Download Instruction sheet of Fluke 717-1000G Measuring Instruments, Test Equipment for Free or View it Online on All-Guides.com. This version of Fluke 717-1000G Manual compatible with such list of devices, as: 717-1500G, 717-300G, 717-30G, 717-500G, 717-1G

Fluke 717-1000G Instruction sheet - Page 1
1
Fluke 717-1000G Instruction sheet - Page 2
2
Fluke 717-1000G Instruction sheet - Page 3
3
Fluke 717-1000G Instruction sheet - Page 4
4
Fluke 717-1000G Instruction sheet - Page 5
5
Fluke 717-1000G Instruction sheet - Page 6
6
Fluke 717-1000G Instruction sheet - Page 7
7
Fluke 717-1000G Instruction sheet - Page 8
8
Fluke 717-1000G Instruction sheet - Page 9
9
Fluke 717-1000G Instruction sheet - Page 10
10
Fluke 717-1000G Instruction sheet - Page 11
11
Fluke 717-1000G Instruction sheet - Page 12
12
Fluke 717-1000G Instruction sheet - Page 13
13
Fluke 717-1000G Instruction sheet - Page 14
14
Fluke 717-1000G Instruction sheet - Page 15
15
Fluke 717-1000G Instruction sheet - Page 16
16
English
®
717 Series
Pressure Calibrators
Instruction Sheet
Introduction
The Fluke 717 Series Pressure Calibrators are compact, battery-powered, 5-digit
instruments that perform the following calibration and measurement functions:
Calibrates P/I (pressure to current) transmitters
Measures pressure using a 1/8-inch NPT pressure fitting and an internal
pressure sensor
Measures pressure via a Fluke 700 Series Pressure Module
Measures current up to 24 mA
Sources loop voltage (to 24 V dc)
Displays simultaneously pressure and current measurements
Calculates mA percentage in Percent Mode
Calculates mA error in Percent Error Mode
The 717 Pressure Calibrators (hereafter, “the Calibrator”) include:
717 1G
717 30G
717 100G
717 300G
717 500G
717 1000G
717 1500G
717 3000G
717 5000G
Full Scale Pressure sensor is as listed in the “Specifications” section under
“Pressure Specifications”. The Calibrator is an IEC 61010, CAT I 30 V, Pollution
Degree 2 instrument. A CAT I instrument is designed to protect against transients
from low-energy sources like, for example, electronic circuits or a copy machine.
The Calibrator comes with a holster, an installed 9 V battery, a set of test leads and
alligator clips, and a 14-language instruction sheet pack. If the Calibrator is
damaged or something is missing, contact the place of purchase immediately.
PN 690013 March 1998, Rev. 2, 3/06 (English)
1998-2006 Fluke Corporation. All rights reserved. Printed in USA
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com