User Manual 9050/9050plus
78413010-003 94
TEAR
NORMAL
Pressing the
TEAR
key the paper is moved to the tear-off position.
Pressing again the
TEAR
key to exit from the tear-off mode, the paper is moved to the
printing position.
TEAR
AUTOMATIC
If the printer is not receiving data, the paper is moved automatically to the tear position.
LABEL
The
TEAR
key is disabled for the tear-off function. This selection is useful
when printing on labels. Pressing the
PARK
key, the printer ejects the paper
toward the back of the printer.
TEAR
NO
The tear-off function is disabled.
5. Press the
PROGRAM
key to exit the setup.
How to Lock/Unlock the Printer Setups
To prevent not expertise persons changing the printer setup parameters, it is possible to lock/unlock the access to the
printer setups as follows:
Press
ON
LINE
,
MACRO
and
TEAR
keys at the same time and keep them pressed while
powering the printer on until the display shows RELEASE KEYS message. As soon as these keys are
released, the following messages will be displayed:
STARTING UP
then 9050plus (9050) Ver. Xx.x
then LOCKED MENU
Now the access to the printer setups is locked. If the
PROGRAM
key is pressed, the LOCKED MENU
message is displayed (the
PROGRAM
key is disabled).
If you decide to unlock the printer setup, turn the printer off, then press the
ON
LINE
,
MACRO
and
TEAR
keys at the same time and keep them pressed while powering the printer on again until the display
shows RELEASE KEYS message. As soon as these keys are released, the following messages
will be displayed:
STARTING UP
then 9050plus (9050) Ver. Xx.x
then UNLOCKED MENU