Honeywell 10260A Series Replacement Instructions
Download Replacement instructions of Honeywell 10260A Series Controller, Switch for Free or View it Online on All-Guides.com.
Brand: Honeywell
Category: Controller , Switch
Type: Replacement instructions for Honeywell 10260A Series
Pages: 5
1
2
3
4
5
62-86-33-41 Page 1 of 5
10260A Series Actuator
1000 Ohm Potentiometer Kit
Replacement Instructions
51451656-507
Document Number
Form: 62-86-33-41
Effective: 08-4-05
Supersedes: None
Summary
This kit contains a new potentiometer and associated parts for your 10260A Actuator.
Tools Needed
To perform the installation procedure, you will need the following tools:
• Medium Flat-blade screwdriver
• Medium Phillips screwdriver
• Small needle-nosed pliers
Procedure
WARNING
Disconnect power before accessing components inside the actuator. Failure to do so may result in death or
serious injury.
ATTENTION
When working with Printed Wiring Assemblies (PWAs) always protect against electrostatic discharge by
wearing a grounded wrist strap. Failure to do so may result in equipment damage.