• Home
• Brands
• HP Manuals
• HP LaserJet Pro MFP M129
• HP LaserJet Pro MFP M129 Getting Started Manual

HP LaserJet Pro MFP M129 Getting Started Manual

Download Getting started manual of HP LaserJet Pro MFP M129 All in One Printer for Free or View it Online on All-Guides.com. This version of HP LaserJet Pro MFP M129 Manual compatible with such list of devices, as: LaserJet Pro MFP M129, LaserJet Pro MFP M132, LaserJet Ultra MFP M133, LaserJet Ultra MFP M134

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

1

Português ....... 17

Español ........... 12

Français ............ 6

English .............. 1

Windows

1. For Windows 7 or lower, do not connect the USB cable before installing

the software. The installation process prompts to connect the cable at

the appropriate time. If the cable is already connected, restart the printer

when installation prompts to connect the cable.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During Windows software installation, select the option to connect

through a network.

Mac

1. For Mac, connect the USB cable between the computer and the printer

before installing the software.

2. Continue to “6. Locate or download the software installation les.”

Wireless network connection

(wireless models only)

Touchscreen control panels

1. To connect the printer to a wireless (Wi-Fi) network, on the printer control

panel, touch the Wireless button.

2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select

the network name from the SSID list, or enter the network name if it is

not listed.

3. Use the keyboard to enter the passphrase, and then touch the OK button.

4. Wait while the printer establishes a network connection.

5. On the printer control panel, touch the Network button. If an IP address

is listed, the network connection has been established. If not, wait a few

more minutes and try again. Note the IP address for use during software

installation. Example IP address: 192.168.0.1

6. To print from a computer, continue with “6. Locate or download the

software installation les.” To print from a phone or tablet only,

continue with “8. Mobile and wireless printing (optional).”

2-line control panels

1. To connect the printer to a wireless (Wi-Fi) network, make sure that the

printer, access point, and computer are turned on and that the computer

is connected to the wireless network.

2. A USB cable will be required.

3. Disconnect any USB or Ethernet cable that is connected to the printer.

4. To print from a computer, continue with “6. Locate or download the

software installation les.” To print from a phone or tablet only,

continue with “8. Mobile and wireless printing (optional).”

NOTE: During software installation, select the option to Help me set up

arst-time wireless connection.

Wired (Ethernet) network connection

(optional)

Use a standard network cable.

1. Connect the network cable to the printer and to the network. Wait a few

minutes for the printer to acquire a network address.

2. Continue to “6. Locate or download the software installation les.”

NOTE: During software installation, select the option to Connect through

a network.

www.hp.com/support/ljM129MFP www.register.hp.com

LaserJet Pro MFP M129-M132,

LaserJet Ultra MFP M133-M134

Getting Started Guide

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable.

IMPORTANT:

Follow

Steps 1 - 3 on

the printer hardware setup

poster, then continue

with Step 4.

2

5.

Select a connection method

4.

Set up the control panel

At the printer control panel, check the display status before beginning software installation.

Manually congure the IP address

See the printer user guide for information on how to manually congure the IP

address www.hp.com/support/ljM129MFP.