• Home
• Brands
• Casio Manuals
• Casio E-Con EA-200
• Casio EA-200 User's Manual

Casio EA-200 User's Manual

Download Operation & user’s manual of Casio E-Con EA-200 Calculator, Power Supply for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

54

55

20020601

English

1-2

Supported Calculator Models

Connection to a supported scientific calculator is essential if you want to get the most out of

your EA-200. A connected Graphic Scientific Calculator sends commands that control the

EA-200 during transfer of sampled data and other operations. Transferred data can be

graphed on the calculator. For details about commands, see “Using Commands” on page

1-3, and “Command Tables” on page α-1-1.

Supported Calculator Models

ALGEBRA FX Series CFX-9850/fx-7400 Series

ALGEBRA FX 2.0 PLUS

CFX-9950GB PLUS

ALGEBRA FX 2.0

CFX-9850GB PLUS

FX 1.0 PLUS

CFX-9850Ga PLUS

FX 1.0

CFX-9850G PLUS

CFX-9970G

fx-9750G PLUS

CFX-9950G

CFX-9850G

fx-7400G PLUS

fx-7450G

Supported Probes

A probe is a sensor that connects to the EA-200 for sampling temperature, light, and other

data.

The EA-200 comes with the three probes described below.

• Voltage Probe................... Measures voltage in the range of –10V to +10V.

CH3 measures in the range of –5V to +5V.

• Optical Probe ................... Measures luminance in the range of 100 to 999.

• Temperature Probe .......... Measures temperature in the range of –20°C to 130°C.

Connecting a Probe to a Channel

A probe connects to an input/output port called a “channel.” The EA-200 has seven

channels: three analog channels (CH1, CH2, CH3), one sonic channel (SONIC), one digital

input/output channel (DIG I/O), a microphone channel, and a speaker channel. You can

connect probes individually, or you can connect multiple probes for simultaneous sampling.

You can use commands to configure the settings for the channel being used for sampling, to

specify how sampled data should be handled, etc.

CH1, CH2, CH3

These channels are for the probes (voltage, temperature, optical) that come bundled with

the EA-200.

SONIC

This channel is for connection of an optional “Motion Sensor (EA-2)”.

DIG I/O

This port is for input and output of an 8-bit binary signal in the range of 0V to 5V.

This could be used, for example, to light an LED.

Built-in Microphone

The microphone can be used to sample sound.

Built-in Speaker

The speaker can be used to output sound samples.

Connecting the EA-200 to a Supported Calculator

Use the special data communication cable to connect the EA-200 to a supported Graphic

Scientific Calculator model.

(1) Turn off the EA-200 and the calculator.

(2) Connect one end of the special data communication cable to the scientific calculator.

(3) Connect the other end of the cable to the EA-200’s MASTER port.

• Insert the plugs as far as they will go. If you experience problems when transferring data,

check to make sure that both plugs are fully inserted.

• Be sure to read the user documentation that comes with the scientific calculator you are

connecting.