Juniper EX3400 Features Manual
Download Features manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Features manual
Model: Juniper EX2300 , Juniper EX4300 , Juniper EX3400
Pages: 476
6. (DHCPv4 only) Override the setting of the broadcast bit in DHCP request packets and
use the Layer 2 unicast transmission method.
See “Using Layer 2 Unicast Transmission for DHCP Packets” on page 58.
7. (DHCPv4 only) Trust DHCP client packets that have a giaddr of 0 and that contain
option 82 information.
See “Trusting Option 82 Information” on page 67.
8. (DHCPv4 and DHCPv6) Override the maximum number of DHCP clients allowed per
interface.
See “Specifying the Maximum Number of DHCP Clients Per Interface” on page 106.
9. (DHCPv4 only) Configure client auto logout.
See “DHCP Auto Logout Overview” on page 124.
10. (DHCPv4 and DHCPv6) Enable or disable support for DHCP snooped clients on
interfaces.
See “Enabling and Disabling DHCP Snooped Packets Support for DHCP Relay Agent”
on page 72.
11. (DHCPv4 and DHCPv6) Delay authentication of subscribers until the DHCP client
sends a Request packet.
See the delay-authentication.
12. (DHCPv4 and DHCPv6) Send release messages to the DHCP server when clients are
deleted.
See “Sending Release Messages When Clients Are Deleted” on page 58.
13. (Optional) Specify that when the DHCP or DHCPv6 relay agent receives a Discover
or Solicit message that has a client ID that matches the existing client entry, the relay
agent deletes the existing client entry.
See DHCP Behavior When Renegotiating While in Bound State.
14. (DHCPv6 only) Automatically log out existing client when new client solicits on same
interface.
See Automatically Logging Out DHCPv6 Clients.
15. (DHCPv4 only) Disable the DHCP relay agent on specific interfaces.
See “Disabling DHCP Relay” on page 80.
Copyright © 2017, Juniper Networks, Inc.70
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches