Juniper EX3400 Features Manual
Download Features manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Features manual
Model: Juniper EX2300 , Juniper EX4300 , Juniper EX3400
Pages: 476
both-routing-engines—(Optional) Reboot both Routing Engines at the same time.
in minutes—(Optional) Number of minutes from now to reboot the software. This option
is an alias for the at +minutes option.
lcc number——(TX Matrix routers and TX Matrix Plus routers only) (Optional) Line-card
chassis number.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(EX4200 switches and MX Series routers only) (Optional) Reboot the software
on the local Virtual Chassis member.
media (compact-flash | disk)—(Optional) Boot medium for next boot.
media (external | internal)—(EX Series switches and MX Series routers only) (Optional)
Reboot the boot media:
• external—Reboot the external mass storage device.
• internal—Reboot the internal flash device.
member member-id—(EX4200 switches and MX Series routers only) (Optional) Reboot
the software on the specified member of the Virtual Chassis configuration. For
EX4200 switches, replace member-id with a value from 0 through 9. For an MX Series
Virtual Chassis, replace member-id with a value of 0 or 1.
message "text"—(Optional) Message to display to all system users before stopping or
rebooting the software.
other-routing-engine—(Optional) Reboot the other Routing Engine from which the
command is issued. For example, if you issue the command from the master Routing
Engine, the backup Routing Engine is rebooted. Similarly, if you issue the command
from the backup Routing Engine, the master Routing Engine is rebooted.
partition—(TX Matrix Plus routers only) (Optional) Reboot using the specified partition
on the boot media. This option has the following suboptions:
• 1—Reboot from partition 1.
• 2—Reboot from partition 2.
Copyright © 2017, Juniper Networks, Inc.368
DHCP and Other System Services Feature Guide for EX2300, EX3400, and EX4300 Switches