Juniper EX3400 Features Manual
Download Features manual of Juniper EX2300 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Features manual
Model: Juniper EX2300 , Juniper EX4300 , Juniper EX3400
Pages: 476
interfaces-vlan—(Optional) Clear the binding state on the interface VLAN ID and S-VLAN
ID.
interfaces-wildcard—(Optional) Clear bindings on a set of interfaces. This option supports
the use of the wildcard character (*).
logical-system logical-system-name—(Optional) Clear the binding state for DHCP
clients on the specified logical system.
routing-instance routing-instance-name—(Optional) Clear the binding state for DHCP
clients on the specified routing instance.
dual-stack—(Optional) Remove either both arms or single arm of dual-stack.
NOTE:
• The dual-stack command is added in the syntax removes both arms
of the dual-stack with a single command entry.
• When the dual-stack command is not added in the syntax, the clear
dhcpv6 server binding command clears only the family specific arm of
the dual-stack.
Required Privilege
Level
view
Related
Documentation
Clearing DHCP Bindings for Subscriber Access•
• show dhcp server binding on page 378
List of Sample Output clear dhcp server binding <ip-address> on page 343
clear dhcp server binding all on page 344
clear dhcp server binding interface on page 344
clear dhcp server binding <interfaces-vlan> on page 344
clear dhcp server binding <interfaces-wildcard> on page 344
clear dhcp server binding dual-stack all on page 344
Output Fields See show dhcp server binding for an explanation of output fields.
Sample Output
clear dhcp server binding <ip-address>
The following sample output displays the address bindings in the DHCP client table on
the extended DHCP local server before and after the clear dhcp server binding command
is issued.
user@host> show dhcp server binding
343Copyright © 2017, Juniper Networks, Inc.
Chapter 14: Operational Commands (DHCP and DHCP Relay)