Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
Related
Documentation
Line Card Model and Version Compatibility in an EX9200 Switch on page 55•
• Pluggable Transceivers Supported on EX9200 Switches on page 105
• Installing a Line Card in an EX9200 Switch on page 220
• Handling and Storing Line Cards in EX9200 Switches on page 215
EX9200-40F Line Card
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that you can
install in the line card slots on the front of the switch chassis. Line cards are hot-insertable
and hot-removable: You can remove and replace them without powering off the switch
or disrupting switch functions.
This topic describes:
•
Line Card Models on page 71
•
Line Card Components on page 72
Line Card Models
Table 32 on page 71 shows the model number, description of the line card model, and
the Junos OS release in which the line card was first supported.
Table 32: EX9200-40F Line Card
Junos OS Release RequiredDescriptionModel
12.3R2 or laterA line card with 40 1-Gigabit
Ethernet ports, each of which can
house 1-gigabit small form-factor
pluggable (SFP) transceivers
EX9200-40F
See Figure 34 on page 71.
Figure 34: EX9200-40F Line Card
4—1— LEDs for the portsEjector lever
5—2— 1-Gigabit Ethernet portsLine card LED
3—MIC LED
You can use the show version command to see the version of Junos OS for EX Series
switches loaded on the switch.
71Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Line Cards