Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
Table 8: FRUs in an EX9200 Switch (continued)
TypeFRU
Redundant configuration:
•
Master SF module is hot-pluggable.
•
Backup SF module is hot-insertable and
hot-removable.
Base configuration:
•
You must disable the switch before
removing any SF module. See “Taking the
Host Subsystem Offline in an EX9200
Switch” on page 203.
See EX9204 Switch Configurations, EX9208
Switch Configurations, and “EX9214 Switch
Configurations” on page 8.
Switch Fabric module (SF module)
Hot-insertable and hot-removable. We
recommend that you take the line cards
offline before removing them. See “Removing
a Line Card from an EX9200 Switch” on
page 222.
Line cards
Hot-insertable and hot-removable.SFP, SFP+, QSFP+, and CFP transceivers
See “Pluggable Transceivers Supported on
EX9200 Switches” on page 105 for the Junos OS
release in which the transceivers were introduced.
NOTE: Line cards are not part of the base or redundant configuration. You
must order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/ . Failure
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
Related
Documentation
Line Card Model and Version Compatibility in an EX9200 Switch on page 55•
• EX9204 Switch Hardware Overview
• EX9208 Switch Hardware Overview
• EX9214 Switch Hardware Overview on page 3
• Installing and Removing EX9204 Switch Hardware Components
Copyright © 2017, Juniper Networks, Inc.20
EX9214 Switch Hardware Guide