Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
CAUTION: Do not install AC and DC power supplies in the same switch.
Related
Documentation
Chassis Physical Specifications of an EX9214 Switch on page 15•
• Routing Engine Module in an EX9200 Switch on page 29
• Switch Fabric Module in an EX9200 Switch on page 33
• AC Power Supply in an EX9214 Switch on page 45
• Cooling System and Airflow in an EX9214 Switch on page 43
• EX9214 Switch Hardware Overview on page 3
EX9214 Switch Hardware and CLI Terminology Mapping
This topic describes the hardware terms used in EX9214 switch documentation and the
corresponding terms used in the Junos OS CLI. See Table 6 on page 10.
Table 6: CLI Equivalents of Terms Used in Documentation for EX9214 Switches
AdditionalInformation
Item in
DocumentationValue (CLI)Description (CLI)
Hardware
Item (CLI)
“Chassis Physical
Specifications of an
EX9214 Switch” on
page 15
Switch chassis–EX9214Chassis
“Midplane in an EX9200
Switch” on page 27
Switch midplane–One of the following:
•
EX9214-BP
•
EX9214-BP3
Midplane
“Craft Interface in an
EX9200 Switch” on
page 22
Craft interface–Front Panel DisplayFPM Board
•
AC Power Supply in
an EX9214 Switch on
page 45
•
DC Power Supply in
an EX9214 Switch on
page 49
AC or DC power supplyn is a value in the range 0-3.
The value corresponds to
the power supply slot
number.
One of the following:
•
PS 4.1 kW;
200-240 V AC in
•
DC 2.4 kW Power
Entry Module
PEM (n)
Copyright © 2017, Juniper Networks, Inc.10
EX9214 Switch Hardware Guide