Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
Figure 65: Installing a DC Power Supply in an EX9214 Switch
g022050
7. While firmly pushing the handle of the power supply with one hand, use the other
hand to pull the spring-loaded locking pin in the release lever away from the chassis
and turn the release lever in the clockwise direction until it stops.
8. Let go of the locking pin in the release lever. Ensure that it is seated in the corresponding
hole in the chassis.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/ . Failure
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
To connect power to a DC power supply, see “Connecting DC Power to an EX9214 Switch”
on page 158.
195Copyright © 2017, Juniper Networks, Inc.
Chapter 17: Replacing Power Supply