Juniper EX9214 Hardware Manual
Download Hardware manual of Juniper EX9214 Network Router, Switch for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Network Router , Switch
Type: Hardware manual for Juniper EX9214
Pages: 372
(JTAC) can help you diagnose the source of the problem. Your JTAC engineer
might recommend that you check the third-partyoptic or cable and potentially
replace it with an equivalent Juniper Networks optic or cable that is qualified
for the device.
•
EX2200—Uplink ports and dual-purpose uplink ports on the front panel in EX2200
switches support SFP transceivers. You can find the list of transceivers supported on
EX2200 switches and information about those transceivers at the Hardware
Compatibility Tool page for EX2200.
NOTE: EX2200-C switches ensure normal operation in the temperature
range 30° F (0° C) through 104° F (40° C) at altitudes up to 5,000 ft
(1,524 m).
In the following conditions, use extended temperature range SFP
transceivers when fiber uplinks are used:
•
In the temperature range 104° F (40° C) through 113° F (45° C) at
altitudes up to 5,000 ft (1,524 m)
•
In the temperature range 95° F (35° C) through 113° F (45° C) at altitudes
above 5,000 ft (1,524 m) up to 10,000 ft (3,048 m)
•
EX2300—Uplink ports on the front panel in EX2300 switches support SFP and SFP+
transceivers. You can find the list of transceivers supported on EX2300 switches and
information about those transceivers at the Hardware Compatibility Tool page for
EX2300.
NOTE: EX2300-C switches ensure normal operation in the temperature
range 32° F (0° C) through 104° F (40° C) at altitudes up to 5,000 ft
(1,524 m).
In the temperature range 104° F (40° C) through 113° F (45° C) at altitudes
up to 5,000 ft (1,524 m), use extended temperaturerangeSFP transceivers.
The Gigabit Ethernet SFP and SFP+ transceivers installed in EX2300 switches support
digital optical monitoring (DOM): You can view the diagnostic details for these
transceivers by issuing the operational mode CLI command show interfaces diagnostics
optics.
NOTE: The transceivers support DOM even if they are installed in uplink
ports configured as Virtual Chassis ports.
•
EX3200—Optional uplink modules for EX3200 switches support SFP, SFP+, or XFP
transceivers. You can find the list of transceivers supported on EX3200 switches and
information about those transceivers at the Hardware Compatibility Tool page for
EX3200.
107Copyright © 2017, Juniper Networks, Inc.
Chapter 8: Transceiver and Cable Specifications