Dell Inspiron 24 5000 All-in-One Service Manual
Download Service manual of Dell Inspiron 24 5000 Series Desktop, Laptop for Free or View it Online on All-Guides.com.
Replacing the side I/O-board
WARNING
: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer. After working inside your computer, follow the instructions in After working inside
y
our computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/
r
egulatory_compliance.
Procedure
1 Align and place the side-I/O board onto the display-assembly base.
2 Replace the two screws (M2.5x3.5) that secure the side-I/O board to the display-assembly base.
3 Route the headset-port cable through the routing guide on the side-I/O board.
4 Connect the side-I/O power cable to the side-I/O board.
5 Connect the side-I/O cable to the side-I/O board.
6 Align the screw holes on the side-I/O board shield to the screw holes on the display-assembly base.
7 Replace the two screws (M3x5) that secure the side-I/O board shield to the display-assembly base.
8 Route the side-I/O cable, side-I/O power cable, and headset-port cable through the routing guides on the display-assembly base.
9 Connect the headset-port cable to the system board.
10 Connect the side-I/O power cable to the system board.
11 Connect the side-I/O cable to the system board.
27
48 Replacing the side I/O-board