Docomo Ascend HW-03E Instruction Manual
Download Instruction manual of Docomo Ascend HW-03E Cell Phone for Free or View it Online on All-Guides.com.
93
Settings
2
Enter network SSID → Tap "Security" field → Select
security type → Enter password
Security type can be selected from "Open", "WEP", "WPA/WPA2 PSK",
and "802.1x EAP".
3
"Save"
1
Tap access point you want to disconnect on the Wi-Fi
setting screen → "Forget"
You can check Wi-Fi connection status as follows.
・
Status bar
When the terminal connects Wi-Fi network, appears on the status bar to
indicate signal strength.
・
Access point
Tap access point currently connected on the Wi-Fi setting screen to show
information such as connection status, security, signal strength.
1
On the Wi-Fi setting screen, M → "Advanced"
MAC address/IP address of the terminal appears.
■ Notifying Wi-Fi access point
You can set to notify when open network access points are detected.
・
You are notified if Wi-Fi is set to on but the terminal does not connect to access
point.
・
The setting is ON by default.
1
On the Wi-Fi setting screen, M → "Advanced" → Mark
"Network notification"
・ When available access points are found, appears on the status
bar to notify.
■ Using static IP address
You can set the terminal to connect to a Wi-Fi access point using static IP
address.
1
Tap access point you want to connect on the Wi-Fi
setting screen
2
Mark "Show advanced options"
3
Tap "IP settings" field → "Static" → Tap item to enter →
"Connect"
Set Airplane mode, VPN, tethering, etc.
1
From the Home screen, M → "Settings"
2
"More..."
Disconnecting Wi-Fi network
Checking Wi-Fi connection status
Checking MAC address/IP address
Making Wi-Fi advanced settings
Using other connection functions
Item Description
Airplane mode
P.94
VPN
P.94