Canon i560 Start Here

Download Setup instructions of Canon i560 Printer for Free or View it Online on All-Guides.com.

Brand: Canon

Category: Printer

Type: Setup instructions for Canon i560

Pages: 2 (2.54 Mb)

Download Canon i560 Setup instructions

Canon i560 Setup instructions - Page 1
1
Canon i560 Setup instructions - Page 2
2
Parallel Port
Secure
Wire Clips
Parallel Cable
For Parallel Port:
For USB Port:
TURN THE PRINTER OFF.
Connect one end of the parallel cable to
the computer, the other to the printer.
1
2
Pinch the paper guide and slide it to the
left. Load a sheet of blank paper in the
paper rest. Slide the guide toward the
left edge of the paper.
3
USB Port
USB Cable
Continue with Step 6
on side two.
Insert the ink tank into the correct slot.
(Refer to the color guide on the print head holder).
Press down until the ink tank clicks into place.
click
TURN THE PRINTER OFF.
Connect one end of the USB cable
to the computer, the other to the printer.
IMPORTANT: Be sure the printer is
off before continuing, or the computer
will attempt to install the printer
driver before the printer is ready.
IMPORTANT: For correct printer
operation, make sure the ink tanks
are secure in slots.
click
Output Tray
Paper Rest
Paper
Guide
Slide the print head into the holder.
The print head will rest at a slight angle.
Remove the print head from its package.
Remove the orange protective cap
from the print head nozzles.
NOTE: Do not touch the print head
nozzles or electrical contacts.
Lower the lock lever and press it down
until it clicks into place.
Raise the lock lever on the printer.
Print Head Nozzles
Electrical Contacts
Tear at notch to open
Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
Open the front cover. The print head holder
automatically moves to the center. Remove
the protective tape.
Write down the serial number located to
the right of the print head holder. You will
need this later to register the product.
Shipping Tape
POWER
Lamp
POWER
Button
Serial Number
Protective Tape
Press the POWER button.
Remove the shipping tape from the
front and back of the printer.
Ink Tanks
BCI-6C Cyan BCI-6M Magenta
BCI-3eBK Black BCI-6Y Yellow
Power Cord
i 560 Series Print Head
i 560 Series
Desktop Photo Printer
Carefully remove all items from the box.
Documentation
and Software Kit
Peel back the orange tab and completely
remove the plastic wrapper from the Yellow
Ink Tank (BCI-6Y).
Twist off and discard the orange
protective cap.
N
OTE: Avoid ink at the bottom of the tank.
NOTE: The printer will perform a print
head cleaning once the cover is closed.
Insert the remaining ink tanks into
their assigned slots.
Close the front cover and extend the
paper rest and paper output tray.
Protective Cap
1
2
3
4
5
1
5
4
3
1
2
1
2
3
4
5
1
2
Install the Ink Tanks
Unpack the Printer
1
2
34
5
Prepare the Printer
Install the Print Head
Connect the Printer
and Load Paper
Start Here
Easy Setup Instructions
i560 Series
Desktop Photo Printer