Juniper SRX4100 How To Set Up
Download How to set up of Juniper SRX4100 Gateway for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
How to Set Up Your SRX4100 Services Gateway
2
Factory-Default Settings
Interfaces
Interface IP Address
fxp0 192.168.1.1/24
Services
Services
SSH
HTTPS
NETCONF over SSH
Initial Configuration Process
g043458
Install Device
in a Rack
Connect
the Grounding
Cable
Configure Root
Authentication
Connect
to the
Console Port
Power On
the Device
Install the Device in a Rack
1. Attach the mounting ears to the front of the chassis, using the screws
provided. Then, attach the fixed brackets to the rear of the device, using the
screws provided.
g005271
NOTE: Ensure that the rear of the device is supported throughout the
process of mounting the device into the rack.
2. Slide the device into the rack, and secure the mounting ears to the rack, using
the screws provided.
g005272
3. Slide the adjustable brackets into the fixed brackets attached to the rear of
the device
g005273
4. Secure the adjustable brackets to the rack, using the screws provided.
g005274