• Home
• Brands
• Canon Manuals
• Canon PIXMA Pro9500
• Canon PIXMA Pro9500 Start Here

Canon PIXMA Pro9500 Start Here

Download Setup instructions of Canon PIXMA Pro9500 Printer, Software for Free or View it Online on All-Guides.com. This version of Canon PIXMA Pro9500 Manual compatible with such list of devices, as: PIXMA Pro9500, 0373B001, 0373B001AA - Pixma Pro9500 Professional Large Format Inkjet Printer, Pro9500 - PIXMA Mark II Color Inkjet Printer

1

2

Start Here

Easy Setup Instructions

series

Photo Printer

1 Unpack the Printer

Carefullyremove all items from the box.

Remove the tapes from the printer.

NOTE:

·Ittakes about an hour to complete the setup of the

printer.

·A USB cable is necessary to connect the printer

with your computer.

2

Power Cord

PIXMA Pro9500 series

Print Head

Documentation and

Software Kit

PIXMA Pro9500 series

Photo Printer

1

2 Prepare the Printer

Plug the power cord into the back of the printer

and connect the other end to a power outlet.

Press the POWER button. The printer will

initialize. Wait until the POWER lamp displays a

steady blue light.

Open the Front Tray. Raise the Top Cover.

NOTE: Gently press the mark on the

Front Tray. The Front Tray automatically opens.

The Print Head Holder automatically moves to

the center. Remove the protective tape from

the Print Head Holder. The tape position is

subject to change.

Write down the serial number located inside

the printer. You will need this to register your

products.

IMPORTANT: If the Top Cover is left open for

more than 10 minutes, the Print Head Holder

moves to the right. Close and reopen the Top

Cover to return the holder to the center.

4

3

2

1

3 Install the Print Head

Firmly raise the print head lock lever.

Remove the Print Head from its package.

CAUTION: There might be some transparent or

light color ink on the inside of the bag the Print

Head comes in - this has no effect on print

quality. Be careful not to get ink on yourself

when handling these items.

NOTE: Do not touch the nozzles.

Remove and discard the orange protective cap

from the Print Head.

CAUTION: There might be some transparent or

light color ink on the inside of the protective

cap - this has no effect on print quality. Be

careful not to get ink on yourself when handling

these items.

NOTE:

· Do not touch the print head nozzles and the

electrical contacts.

· Do not attempt to reattach the protective cap once

it has been removed.

Slide the Print Head into the holder.

The Print Head will rest at a slight angle.

NOTE: Do not touch the electrical contacts.

Lower the print head lock lever carefully.

5

4

3

2

1

4 Install the Ink Tanks

Remove the Red Ink Tank (PGI-9R) from its

package.

Remove and discard the orange protective cap

located on the bottom of the ink tank.

IMPORTANT: Do not touch the electrical

contacts.

NOTE:

·To avoid spilling ink, never press on the sides of

an ink tank.

· Do not touch the open ink port once the protective

cap is removed, as this may prevent the ink from

being ejected properly.

Insert the ink tank into the rightmost slot.

Press the mark on the ink tank until it clicks

into place and then its lamp lights red.

Insert the remaining nine ink tanks into their

assigned slots. Ensure that ink lamps light red.

Close the Top Cover. Lift open the Paper

Support and the Paper Support Extension, then

pull out the Front Tray Extension.

NOTE: If the ALARM lamp on the printer flashes

orange after you have closed the Top Cover, an

ink tank may not be installed properly. Open the

Top Cover and make sure that the ink tanks are

installed in the correct order directed on the

label.

5

4

3

2

1

5

Connect the Printer

and Load Paper

IMPORTANT: When the POWER lamp flashes

blue and the printer vibrates, the printer is

shaking the ink tanks. Once you have installed

the ink tanks and have closed the Top Cover,

wait for about 2 minutes 30 seconds until the

POWER lamp stops flashing and stays lit, and

the printer has stopped making operating

noises before proceeding. Do not open the Top

Cover while the printer is operating (the POWER

lamp is flashing blue).

TURN THE PRINTER OFF.

IMPORTANT: Be sure the printer is off before

continuing, or the computer will attempt to

install the printer driver before the printer is

ready.

Connect one end of the USB cable to the

computer, the other to the appropriate USB

port on the printer.

NOTE: The Pro9500 series Photo Printer is

equipped with USB 2.0 Hi-Speed port. If your PC

does not support USB 2.0 Hi-Speed, or if any

non-certified USB 2.0 cable or driver is used for

the connection, the printer will operate at a

lower speed provided under USB 1.1.

Pinch the Paper Guide and slide it to the left.

Load two sheets of plain paper into the Auto

Sheet Feeder, align the paper with the right

edge of the Auto Sheet Feeder, then slide the

Paper Guide toward the left edge of the paper.

IMPORTANT: Print Head Alignment (Step 6)

requires that letter size paper is loaded in the

Auto Sheet Feeder (top paper feeder).

3

2

1

Top Cover

Tear at notch to open

Nozzles

Print Head

Nozzles

Electrical

Contacts

Electrical

Contacts

USB Cable

USB Cable

USB Port

Protective Cap

click

Auto Sheet

Feeder

Paper

Guide

Continue with Step 6

on the back page.

Front Tray Extension

Paper Support

Extension

Paper Support

Top Cover

POWER Button

POWER Lamp

USB Port

Protective Tape

Serial Number Location

PGI-9PM

Photo

Magenta

PGI-9PBK

Photo

Black

PGI-9MBK

Matte

Black

PGI-9PC

Photo

Cyan

PGI-9GY

Gray

PGI-9M

Magenta

PGI-9Y

Yellow

PGI-9C

Cyan

PGI-9G

Green

PGI-9R

Red

Electrical Contacts

Ink Lamp

Print Side

Refer to the color

guide on the print

head lock lever.

Front Tray

Ink Port

QT50144V02