CRAY CX1 Quick Start User Manual
Download Quick start user manual of Cray CX1 Desktop for Free or View it Online on All-Guides.com.
1
2
3
CRAY CX1
QUICK START USER’S GUIDE
CX1 QUICK START GUIDE SECTIONS
GET TING TO KNOW THE CX1
(RED SECTION)
STAGE 1 - UNPACKING
(BLUE SECTION)
STAGE 2 - PRE-ASSEMBLY
(YELLOW SECTION)
STAGE 3 - ASSEMBLY
(GREEN SECTION)
UNPACKING
STAGE 4 - POWERING THE CX1
(GREY SECTION)
Installation and Service:
To avoid injury from electrical shock, only
qualified technical ser vice personnel can
perform any type of service or installation on
this system.
Enclosure Cover:
In compliance with applicable safety, emission,
and thermal requirements, no covers should
be removed and all bays must be filled with
compute shelves.
Electrostatic Discharge:
Observe normal Elec trostatic Discharge (ESD)
procedures during system integration to avoid
possible damage to the server board and/or
other components of the system.
Shipping Information:
Do not ship any CX1 compute shelves within the CX1
system chassis. Doing so may result in damage to
the CX1 system.
CX1 System Power:
The power cord must be disconnected before
installing or removing any shelves. Dedicate a
20 Amp AC Outlet exclusively to the CX1.
The high processor count of the CX1 could require
the draw of a full 20 Amp circuit.
Safety Information:
Before removing the CX1 system from its box,
to prevent any damages to the system itself or
injury to the person handling the CX1, all the
safety cautions must be read.
GETTING TO KNOW THE CX1
Power Inlet 110-250V
50-60Hz 20A
Future
Expansion
REAR PANEL
USB 1 USB 2
(to front of system)
USB
(to DVD-ROM)
ZONE B
ZONE A
ZONE B
ZONE A
PS 1
PS 2
PS 2
PS 1
FRONT PANEL
DVD- ROM
USB PO RT 2
ZONE A POWER
ZONE B POWER
USB PO RT 1
FRONT- PANEL LCD
GET 1.1
GET 1.2
THE CX1 SKID PACKAGING
STEP 1
STEP 2
STEP 3
STEP 4
1
7
8
5
5
6
6
4
2
3
Box Contents
Qty
[1] Documentation Box
1
[2] Chassis Cart Box
1
[3] Rail Box
1
[4] Main Chassis Box
1
[5] Power Supply Box
2
[6] Blade Box
2
[7] Cables
1
[8] Accessories
1
Unlocking the CX1 ROAD CASE
Remove the front portion of the case (2 latches on the right side)
5
1
2
43
6
FRONT
5
CX1 ROAD CASE
Package Contents
Shelf Slot #1
Shelf Slot #2
Shelf Slot #3
Shelf Slot #4
Main Chassis
Slot Containing :
- Rails and/or Chassis Cart
1
2
3
4
5
6
Accessory Area
Containing :
- Keyboard & Mouse + Batteries
- RJ-45 Cables
- Packing Slip
- (Optional) Infiniband Cables
7
BACK
7
THE CX1 ROADCASE PACKAGING