CognitiveTPG A799II Setup Manual

Download Setup manual of CognitiveTPG A799II Printer for Free or View it Online on All-Guides.com.

Brand: CognitiveTPG

Category: Printer

Type: Setup manual for CognitiveTPG A799II

Pages: 2

Download CognitiveTPG A799II Setup manual

CognitiveTPG A799II Setup manual - Page 1
1
CognitiveTPG A799II Setup manual - Page 2
2
A799II Two-Color Thermal Receipt Printer Setup Guide
Thank you for selecting CognitiveTPG Model A799II Two-Color Single Station
Thermal POS Receipt Printer
BEST PRINTER... BEST PRICE!
You have chosen the world’s most innovative thermal receipt printer. A799II features
ultra-fast printing, industry-leading durability and outstanding graphics capability.
Please review this Setup Guide and visit www.CognitiveTPG.com > Support > Drivers
& Downloads to nd the latest printer drivers, software, and documentation, including
the A799II User Guide and A799 Series Programming Guide. If you have any questions,
please call us at 800-732-8950 or 607-274-2500 or visit www.CognitiveTPG.com.
Please visit the websites Warranty Registration section to register your printer and
provide feedback on its quality.
Setting up the printer (Pages referenced are from the User Guide)
1 Unpack the printer, saving all packing materials for future shipping or storage (page 11).
Made under one or more of the following U.S. patents: 4886381, 5579043,
5613787, 5651624, 5713678, 5752779, 5789916, 5800080, 5879090,
5887999, 5975776, 6027266, 6085973, 6089450, 6129465, 6155483,
6404452, 6486902, 6504331, 5749277, 6722754, 6739773, 6784909.
Other U.S. and international patents pending.
2 Load the roll of paper (page 12). You can change the paper type used in this printer
(page 22).
Federal Communications Commission (FCC) Radio Frequency Interference Statement Warning
Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users
authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Information to the User
This equipment must be installed and used in strict accordance with the manufacturer’s instructions. However, there is no
guarantee that interference to radio communications will not occur in a particular commercial installation. If this equipment
does cause interference, which can be determined by turning the equipment o and on, the user is encouraged to contact
CognitiveTPG immediately.
CognitiveTPG is not responsible for any radio or television interference caused by unauthorized modication of this equipment
or the substitution or attachment of connecting cables and equipment other than those specied by CognitiveTPG. The
correction of interferences caused by such unauthorized modication, substitution or attachment will be the responsibility of
the user.
In order to ensure compliance with the Product Safety, FCC and CE marking requirements, you must use the power supply,
power cord, and interface cable which are sold for use with this product or which meet the following parameters:
Power Supply
UL Listed (QQGQ), Class 2 power supply with SELV (Secondary Extra Low Voltage), non-energy hazard output, LPS (limited
power source), input rated 100-240 Vac, 1.6 A, 50/60 Hz, output rated 24 Vdc, 2.5 A for 60 watt unit.
Use of this product with a power supply other than the CognitiveTPG power supply will require you to test the power supply
and CognitiveTPG printer for FCC and CE mark certication.
Communication Interface Cable
A shielded (360 degree) interface cable must be used with this product. The shield must be connected to the frame or earth
ground connection or earth ground reference at EACH end of the cable.
Use of a cable other than described here will require that you test the cable with the CognitiveTPG printer and your system for
FCC and CE mark certication.
Power Cord
A UL listed, detachable power cord must be used. For applications where the power supply module may be mounted on
the oor, a power cord with Type SJT marking must be used. For applications outside the US, power cords which meet the
particular countrys certication and application requirements should be used.
Use of a power cord other than described here may result in a violation of safety certications which are in force in the country
of use.
Industry Canada (IC) Radio Frequency Interference Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Voluntary Control Council for Interference (VCCI) Radio Frequency Interference Statement
This is a Class B product based on the standard of the voluntary Control Council for Interference by Information Technology
Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble
occurs, the user may be required to take corrective actions.
Disclaimer
Information in this document is subject to change without notice. Consult your CognitiveTPG sales representative for
information that is applicable and current. CognitiveTPG reserves the right to improve products as new technology,
components, software, and rmware become available.
No part of this document may be reproduced, transmitted, or translated in any form or by any means, electronic or mechanical,
for any purpose without the express written permission of CognitiveTPG.
Copyright
Copyright © 2017 by CognitiveTPG, LLC.
950 Danby Road, Ithaca, New York 14850, USA. All rights reserved. Printed in USA. Property of CognitiveTPG, LLC.
Trademarks
CognitiveTPG™ is a trademark of CognitiveTPG, LLC.
Microsoft, Windows are registered Trademarks of Microsoft Corporation in the U.S.A. and/or other countries.
Inside Out Networks, Inside Out, EPIC, and Edgeport are trademarks of Inside Out Networks.
All other trademarks and registered trademarks are the property of their respective holders.
Website: http://www.CognitiveTPG.com
A799 - 2SUG000 Rev. G 12/2017 Printed in China