HP ProLiant ML110 G6 Installation Sheet

Download Installation sheet of HP ProLiant ML110 G6 Server for Free or View it Online on All-Guides.com.

Brand: HP

Category: Server

Type: Installation sheet for HP ProLiant ML110 G6

Pages: 2

Download HP ProLiant ML110 G6 Installation sheet

HP ProLiant ML110 G6 Installation sheet - Page 1
1
HP ProLiant ML110 G6 Installation sheet - Page 2
2
HP ProLiant ML110 G6
Server
Installation Sheet
Configuring the server
1. Connect all peripherals to your server.
o Keyboard
o Mouse
o Monitor
2. Determine the server BIOS version.
a. Power up the server.
b. Press the
Esc key at the HP logo screen, and then press the
Pause key to halt screen movement.
c. Note the server BIOS version.
d. Verify the server BIOS version against the latest BIOS
version listed for this server on the HP website:
http://www.hp.com
e. If you do not have the latest BIOS, update the BIOS now.
Refer to the server’s
Server Maintenance and Service
Guide available on the HP website: http://www.hp.com
Default boot priority
By default, the server searches for boot devices in the following
order:
1. Removable devices
2. CD-ROM/DVD-ROM drive
3. Hard drive
4. Embedded NIC, PXE (Preboot Execution Environment—remote
boot over LAN)
Server configuration guidelines
Read the following items before performing any of the installation
procedures described in later sections.
WARNING: Failure to properly turn off the system power
before you open the server or before you start removing
or installing hardware components may cause serious
damage as well as bodily harm.
WARNING: To reduce the risk of personal injury from
hot surfaces, allow the chassis and any installed
hardware component to cool before touching them.
CAUTION: Observe the ESD precautions, pre- and post-
installation procedures, and proper cabling management
described in
Chapter 2 of the server’s Maintenance and
Service Guide
when performing any installation
procedure.
Identifying server components
Front panel components
Item Component Item Component
1 Optical disc drive (ODD) 6 External ambient thermal
sensor
2 ODD manual eject hole 7 HDD EMI shield thumbscrew
3 ODD eject button 8 HDD EMI shield
4 Power button
5
USB ports
9 2
nd
removable media drive
bay EMI shield
NOTE: The location of items 2 and 3 may vary depending on the model of
the installed removable media drive.
Rear panel components
Item Component Item Component
1 Kensington lock notch 10 Management NIC port (RJ-45)
2 Cable lock provision notch 11 Video port
3 Access panel thumbscrew 12 Serial port
4 Expansion slot cover retainer
thumbscrew
13 USB ports
5 Expansion slot cover retainer 14 Embedded NIC port (RJ-45)
6 Expansion slot 1 cover 15 PS/2 keyboard port
7 Expansion slot 2 cover 16 PS/2 mouse port
8 Expansion slot 3 cover
9 Expansion slot 4 cover
17 Power supply cable socket
System board components
Item Code Component
1 ATXPWRCN2 4-pin ATX processor power connector
2 DIMM4B Channel B 1
st
DDR3 DIMM slot
3 DIMM3D Channel B 2
nd
DDR3 DIMM slot
4 DIMM2A Channel A 1
st
DDR3 DIMM slot
5 DIMM1C Channel A 2
nd
DDR3 DIMM slot
6 ATXPWRCN1 24-pin ATX system board power connector
7 CPU1 Processor
8 CPUFAN1 CPU heatsink fan connector
9 PCHSW1 System configuration switch
10 FPCN1 Power button / front panel LED cable connector
11 SATA1 1
st
HDD SATA cable connector
12 SATA2 2
nd
HDD SATA cable connector
13 SATA3 3
rd
HDD SATA cable connector
14 SATA4 4
th
HDD SATA cable connector
15 SATA5 1
st
ODD SATA cable connector
16 SATA6 2
nd
ODD SATA cable connector
17 USBCONN2 Internal USB connector for STD USB
18 USBCONN3 Internal USB connector for tape device
19 FPUSBCONN1 Front panel USB port connector
20 HDDLEDCN1 External SAS HDD LED cable connector
21 TPMCN1 TPM (Trusted Platform Module) connector
22 Full-height
full-length Slot 4
PCIe x16 (16)
45W
Full-height/full-length PCIe Gen2 x16 slot (x16)
23 Full-height
full-length Slot 3
PCIe x8 (4)
25W
Full-height/full-length PCIe Gen1 x8 slot (x4)
24 Full-height
full-length Slot 2
PCI 32-bit
33 MHz 25W
Full-height/full-length 32-bit/33 MHz PCI slot
25 THERSNRCN1 Cable connector for the external ambient thermal
sensor
Part number: 580147-002
March 2010 (Second edition)