• Home
• Brands
• Crestron Manuals
• Crestron TSW-1060
• Crestron TSW-560 Installation Manual

Crestron TSW-560 Installation Manual

Download Installation manual of Crestron TSW-1060 Racks & Stands, Touch Panel for Free or View it Online on All-Guides.com. This version of Crestron TSW-1060 Manual compatible with such list of devices, as: TSW-1060, TSW-560, TSW-760, TSW-UMB-60, TSW-UMB-60-BBI

1

2

TSW-UMB-60-BBI

Wall Mount Back Box for TSW-560/760/1060 & TSW-UMB-60

Installation Guide

3. Ensure that the “TOP” text on the inside of the back box is facing upward, and then

mount the TSW-UMB-60-BBI into an appropriately sized cutout in the mounting

surface as shown in the following illustration. (When making the cutout, refer to the

product dimensions listed in the table of specications on the product website.)

Depending on the installation, forced ventilation may be required.

Mounting the TSW-UMB-60-BBI (Exploded View)

Description

The TSW-UMB-60-BBI provides a recess wall-mounted metal back box for the

Crestron

®

TSW-UMB-60 Universal Mounting Bracket. The TSW-UMB-60-BBI is designed

for installation in concrete and masonry applications. Conduit knockouts are also provided

on the top and bottom of the back box.

Installation

To install the TSW-UMB-60-BBI, use the following procedure:

NOTE: For some installations, forced venting may be required.

NOTE: Knockout holes are intended for Class 2 wiring only and are 20 mm (13/16") in

diameter.

1. Separate the two halves of the mounting bracket that comes with the TSW-560,

TSW-760, TSW-1060, or TSW-560P touch screens by removing the two 1-1/2"

screws that hold the halves together. Refer to the following illustrations.

Separating the Halves of the Mounting Bracket (Before Separation)

Additional Resources

Visit the product page on the Crestron website (www.crestron.com)

for additional information, including any rmware updates. Use a QR

reader application on your mobile device to scan the QR image.

Remove (2) 1-1/2" screws

Solid mounting

surface (such as

concrete or masonry)

Plaster

TSW-UMB-60-BBI

Metal bracket

(included with

touch screen)

Screws (2):

6-32 x 1/2"

Wiring

Cutout in

mounting

surface

2. Use the two included 6-32 x 1/2" screws to install the front portion of the mounting

bracket assembly onto the back box. Refer to the following illustration.

Installing the Mounting Bracket into the TSW-UMB-60-BBI

Screws (2):

6-32 x 1/2"

TSW-UMB-60-BBI

Metal bracket

(included with

touch screen)

NOTE: Remove the appropriate knockouts on the TSW-UMB-60-BBI before

installation.

NOTE: The rear portion of the mounting bracket can be saved for possible future

use. Only the front portion is required for installing the TSW-UMB-60-BBI.

Separating the Halves of the Mounting Bracket (After Separation)

105 mm

(4.13 in)

68 mm

(2.65 in)

77 mm

(3.00 in)

NOTE: The TSW-UMB-60-BBI can also be mounted vertically for use with the

TSW-560P portrait touch screen. For this installation, ensure that the “TOP” text

on the inside of the back box is facing to the right, and then install the

TSW-UMB-60-BBI into an appropriately sized cutout in the mounting surface.

(Rotate the product 90º to the right to determine the necessary cutout dimensions

for portrait mounting.)