• Home
• Brands
• Kenwood Manuals
• Kenwood KPG-22U
• Kenwood KPG-22U Instruction Manual

Kenwood KPG-22U Instruction Manual

Download Instruction manual of Kenwood KPG-22U Cables and connectors for Free or View it Online on All-Guides.com. This version of Kenwood KPG-22U Manual compatible with such list of devices, as: KPG-22U, KPG-36U, KPG-43U, KPG-46U

1

2

KPG-22U KPG-36U

KPG-43U KPG-46U

USB PROGRAMMING INTERFACE CABLE

INSTRUCTION MANUAL

SUPPLIED ITEMS

• USB programming interface cable (USB 2.0 compliant)

<cable length: 4.92 ft/ 1.5 m>

• CD (with driver software)

• Instruction manual (B62-2326-XX)

OPERATING SYSTEM

Windows 7, Windows 8.1, or Windows 10 operating system.

(Use in desktop mode is recommended. The driver installation software

does not support touch input.)

INSTALLING THE DRIVER

When using the KPG-22U/ 36U/ 43U/ 46U for the fi rst time, install the

supplied KPG-22U/ 36U/ 43U/ 46U driver.

ATTENTION:

◆

Applicable operating systems are subject to change without notice

due to the end of the technical support by Microsoft Corporation or

change of the product specifi cations.

◆

For Fpro software, use version 6.30 or later.

◆

Depending on the usage condition of the USB apparatus, saved

content may be lost. JVC KENWOOD Corporation does not take

responsibility for damages or lost content.

1

Turn on the PC, then insert the supplied CD into the CD-ROM drive

of the PC. Double-click the

[CP210xVCPInstaller_x64.exe] or

[CP210xVCPInstaller_x86.exe]

fi le. When the Installation Wizard

starts, click

[

Next>

]

.

• Concerning the 64-bit version or 32-bit version, you should

check the PC in advance.

2

Read through the licensing agreement. If you consent to the terms

of the agreement, check the “I accept this agreement”, then click

[

Next>

]

.

• Start the installation.

3

When the driver fi nishes copying to the PC, click the [Finish].

Note:

◆

The KPG-22U/ 36U/ 43U/ 46U is installed as a virtual com port.

◆

The KPG-22U/ 36U/ 43U/ 46U does not support programs other

than those used for KENWOOD transceivers.

◆

If the driver cannot be installed or if, having installed the driver

and restarted your PC, the driver cannot be found or the operation

does not stabilize, try changing the USB port to that which you

have connected the KPG-22U/ 36U/ 43U/ 46U. Additionally, try

removing other equipment attached to the USB ports of the PC.

◆

Access the following URL for the driver download information:

http://www.kenwood.com/jp/usb-com/

CONNECTING TO A PC AND TRANSCEIVER

Connect the KPG-22U/ 36U/ 43U/ 46U USB connectors to the USB port

of the PC, and the other connector to the transceiver.

Note:

◆

Connect the KPG-22U/ 36U/ 43U/ 46U directly to the transceiver

and the PC (or USB HUB).

◆

Do not connect the KPG-22U/ 36U/ 43U/ 46U other than PC (or

USB HUB). It causes malfunction of the KPG-22U/ 36U/ 43U/ 46U

and the transceiver.

CONFIRMING THE INSTALLATION

Connect the KPG-22U/ 36U/ 43U/ 46U to a USB port. In the “

Device

Manager

”, open the “

Port (COM and LPT)

”. If “

Silicon Labs CP210x USB to

UART Bridge (COMx)

” appears, installation is complete.

COPYRIGHTS

• Windows

®

is a registered trademark of Microsoft Corporation in the

United States and/or other countries.

• Other product and company names mentioned herein may be the

trademarks of their respective owners.

One or more of the following statements may be applicable to this

equipment.

FCC WARNING

This equipment generates or uses radio frequency energy. Changes or

modifi cations to this equipment may cause harmful interference unless the

modifi cations are expressly approved by the party responsible/

JVC KENWOOD. The user could lose the authority to operate this equipment if

an unauthorized change or modifi cation is made.

INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY

THE FCC

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can generate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that the interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer for technical assistance.

Information on Disposal of Old Electrical and Electronic Equipment and

Batteries (applicable for countries that have adopted separate waste

collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot

be disposed as household waste.

Old electrical and electronic equipment and batteries should be recycled

at a facility capable of handling these items and their waste byproducts.

Contact your local authority for details in locating a recycle facility nearest

to you.

Proper recycling and waste disposal will help conserve resources whilst

preventing detrimental effects on our health and the environment.

Eski Elektrikli ve Elektronik Cihazların ve Pillerin İmhası Hakkında Bilgi (ayrı

atık toplama sistemlerine sahip olan ülkelerde geçerlidir)

Bu sembolü (üzeri çizili çöp bidonu) içeren ürün ve piller evsel atı k çöpleri

ile birlikte atılamaz.

Kullanılmış elektrikli ve elektronik cihaz ve piller, bu tür maddeleri ve

bunların yan ürünlerini iş lemeye elverişli bir geri kazanım tesisine

gönderilmelidir.

Size en yakın geri kazanım tesisinin konumunu öğrenmek üzere yerel

yetkililerinize danışın.

Doğru geri kazanım ve atık uzaklaştırma y öntemleri, sadece öz

kaynakların korunmasına yardımcı olmakla kalmayıp ayrıca sağlığımıza ve

çevreye olacak zararlı etkilerini engellemeye yardımcı olur.

Uyarı: Pilin alt tarafında bulunan “Pb” işareti, bu pillin kurşun içerdiğini belirtir.

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik

Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

B62-2326-30 (M)

© 2018