Opticon OPH-1003 Quick Start Manual
Download Quick start manual of Opticon OPH-1003 Touch terminals for Free or View it Online on All-Guides.com.
Quick Start Guide
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store in a safe place.
Introduction
OPH
-
1003
Notice
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or con-
verted to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or
indirect damages howsoever caused.
Caution and Warning
1. Laser Safety
•Donotstareintothelaserbeam.
2. Handling Instructions
【
OPH-1003
】
OPH-1003
】】
•Donotattempttodisassemble,modifyorupdatethisdevice.
•Operatingthescannerwhileoperatingmachineryoravehiclecanbedistracting.
•Donotdropthisproductorputheavyitemsonthisproduct.
•Donotinsertforeignsubstancesintothedevice.
•Donotusethisproductinthefollowingareas:
-Inareasexposedtodirectsunlightforlongperiodsoftime.
-Industyenvironments.
-Nearwaterorotherliquids,orinextremelyhighhumidity.
-Nearheatsources,suchasradiators,heatregisters,stoves,orothertypesofdevicesthatproduceheat.
-Nearmicrowaves,medicaldevices,orlow-powerradiostations.
•Whencleaningthisproduct,rubgentlywitheitherasoftdryclothoradampclothwithmilddetergent.
【
Battery Pack
】
Battery Pack
】】
• Do not attempt to disassemble this battery.
• Do not expose the battery pack to liquids or allow the battery contacts to get wet.
• Do not expose the battery pack to heat sources including other devices that produce heat.
• Do not short the power leads on the battery pack. If the (+) and (-) terminals come in contact with metals
(such as a necklace or hairpin), a short-circuit will occur.
• Do not load the battery pack with its (+) and (-) terminals reversed.
• Check the local regulations for proper battery disposal.
( Please refer to the specification manual and instruction guide for details.)
■
Detailed View
Overview
■
OPH-1003 Basic Specifications
Parameter Specifications
Physical
Features
Size
(W) 55
×
(D) 23
×
(H) 136 mm Max
Weight 140g Max (excluding battery)
Color Black
Control
Section
MAIN CPU
32bit RISC CPU
Built-in ROM : N/A
Built-in RAM : 64KB
Clock frequency : 24MHz, 12MHz, STOP
External
Memory
FLASH ROM
2MB
SRAM 2MB
Extended FLASH ROM
64MB
LCD
Section
Material
FSTN semi-transparent LCD
Backlight
White LEDs
Active Area
33.58mm
×
8.38mm
Number of
Dots
112 dots
×
128 dots
Dot pitch : 0.30mm
Other Display
Section
LED
Bi-color LED (Red and Green)
Buzzer
Tone and loudness can be congured.
Operation Section
Keys
22 keys
Scanning
Section
Light Source
Red laser diode
Wavelength
650
±
10nm
Light Output
1mW or less
Scan Rate
100scan / sec
Supported
Symbologies
JAN/UPC/EAN (WPC) incl. add on,
Chinese Post, Codabar/NW-7, Code
11, Code 39, Code 93, Code 128,
IATA, Industrial 2of5, Interleaved
2of5, ISBN-ISMN-ISSN, Korean Postal
Authority code, Matrix 2of5, MSI/
Plessey-UK/Plessey, RSS, S-Code,
Telepen, Tri-Optic, Composite codes
Power
Supply
Section
Main Power Supply
Lithium-ion battery (3.7V, 1100mAh)
Backup Power Supply
Lithium secondary battery
Operating Time
50 hours
Data Retention Time
7days
Comm.
Section
IrDA
IrDA Ver1.2
Baud rate : 2400bps to 115.2kbps
Clock
Section
Real Time
Clock (RTC)
Support year, month, day, hour,
minute, second. (leap year supported)
Durability
Operating Temp.
-10deg.Cto50deg.C
Operating Humidity
20% to 85% (non-condensing)
Storage Temp.
-20deg.Cto60deg.C
Storage Humidity
20% to 85% (non-condensing)
Charging Temp.
0 deg. C to +40 deg. C
Ambient
Light Immu-
nity
Incandescent Light : 4,000 lx
Fluorescent Light : 4,000 lx
Sunlight : 80,000 lx
Dust- and Drip-proof
IP54
Shock En-
durance
Dropped 18 times onto concrete from a
height of 150cm with no defects found.
Copyright
©
2007, Opticon All rights reserved.
No. Item Function
1 Portable Terminal A laser portable terminal with a barcode scanning feature.
2
Lithium-ion Battery Pack Designated battery pack for the OPH-1003.
3
Strap
4
Quick Start Guide
Provides product information and instruction guide.
Before Getting Started
■
What's in the Box
Confirm that you have the following items before getting started:
* The number of accessories may differ depending on the product specification.
Please contact the nearest dealer if accessories are damaged or missing.
No. Part Function
①
LCD
Indicates the status of program
execution, scanned data and so
on.
②
Status LED
(Red and Green)
Alerts users the status of scanning
operation and data communication.
③
Optical Window
The scan engine emits a laser beam
through the optical window while
scanning a barcode.
④
SCAN Key
Starts a barcode scanning operation.
⑤
POWER Key Turns ON or OFF the power.
⑥
IrDA
Communication
Window
This portable terminal communicates
with the designated cradle through
the IrDA communication window.
⑦
Buzzer Hole
Buzzer sounds through the buzzer
hole.
⑧
Battery Cover Protects the battery pack.
⑨
Charging
Terminals
Electrical terminals for power
distri-
bution and power management.
⑩
Strap Hook
・
To avoid communication problems between the portable
terminal and a cradle, keep the IrDA communication
window clean.
・
The IrDA communication performance may declineThe IrDA communication performance may decline
duetoexcessiveambientlightespeciallyunder
strong sunlight or inverted fluorescent light.
Memo