• Home
• Brands
• LG Manuals
• LG LRH7080D Series
• Lg LRH7160D Series Owner's Manual

Lg LRH7160D Series Owner's Manual

Download Owner's manual of LG LRH7080D Series DVR, Network Hardware for Free or View it Online on All-Guides.com.

1

2

SIMPLE MANUAL

Hybrid Digital Video Recorder

1512 (V6.0)

LRH7160D Series

LRH7080D Series

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or

modifications to this equipment may cause harmful interference unless the modifications are

expressly approved in the instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of

this product in the end user.

• Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.

• Holes in metal, through which insulated wires pass, shall have smooth well rounded

surfaces or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA

70.

Warning: This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or

moisture.

Caution: This installation should be made by a qualified service person and should conform

to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified

personnel only.

Caution: The apparatus should not be exposed to water (dripping or splashing) and no

objects filled with liquids, such as vases, should be placed on the apparatus.

Caution:

This product employs a Laser System. To ensure proper use of this product, please read

this owner’s manual carefully and retain it for future reference. Should the unit require

maintenance, contact an authorized service center. Use of controls, adjustments, or the

performance of procedures other than those specified herein may result in hazardous

radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must

remain readily accessible.

LG Electronics hereby declares that this/these product(s) is/are in

compliance with the essential requirements and other relevant

provisions of Directive 2004/108/EC, 2006/95/EC, and 2011/65/EU.

Contact office for compliance of this product :

LG Electronics Inc.

EU Representative, Krijgsman 1,

1186 DM Amstelveen, The Netherlands

• Please note that this is NOT a Customer Service contact point. For Customer Service

Information, see Warranty Card or contact the dealer that you purchased this product.

Disposal of your old appliance

1. This crossed-out wheeled bin symbol indicates that waste electrical and

electronic products (WEEE) should be disposed of separately from the

municipal waste stream.

2. Old electrical products can contain hazardous substances so correct

disposal of your old appliance will help prevent potential negative

consequences for the environment and human health. Your old

appliance may contain reusable parts that could be used to repair other

products, and other valuable materials that can be recycled to conserve

limited resources.

3. You can take your appliance either to the shop where you purchased

the product, or contact your local government waste office for details of

your nearest authorised WEEE collection point. For the most up to date

information for your country please see www.lg.com/global/recycling

Disposal of waste batteries/accumulators

Pb

1. This symbol may be combined with chemical

symbols for mercury (Hg), cadmium (Cd) or lead

(Pb) if the battery contains more than 0.0005% of

mercury, 0.002% of cadmium or 0.004% of lead.

2. All batteries/accumulators should be disposed

separately from the municipal waste stream via

designated collection facilities appointed by the

government or the local authorities.

3. The correct disposal of your old batteries/accumulators will help to prevent potential

negative consequences for the environment, animal and human health.

4. For more detailed information about disposal of your old batteries/ accumulators,

please contact your city office, waste disposal service or the shop where you

purchased the product. (http://www.lg.com/global/sustainability/environment/take-

back-recycling/global-network-europe)

Safety way to remove the battery or the battery from the equipment:

Remove the old battery or battery pack, follow the steps in reverse order than the assembly.

To prevent contamination of the environment and bring on possible threat to human and

animal health, the old battery or the battery put it in the appropriate container at designated

collection points. Do not dispose of batteries or battery together with other waste. It is

recommended that you use local, free reimbursement systems batteries and accumulators.

The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Removal of waste batteries and accumulators

(Product with embedded battery ONLY)

In case this product contains a battery incorporated within the product which cannot be

readily removed by end-users, LG recommends that only qualified professionals remove the

battery, either for replacement or for recycling at the end of this product’s working life. To

prevent damage to the product, and for their own safety, users should not attempt to remove

the battery and should contact LG Service Helpline, or other independent service providers for

advice.

CAUTION: Internal lithium battery in the unit should not be replaced by user because of

danger of explosion if battery is incorrectly replaced ,and must be replaced with the same

type battery by expert.

Replacement of battery

An extended Owner’s Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read

these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive.

Model LRH7160D (16 Channel) is used for the description, operation and details provided in this operating guide.

Note: It is strongly recommended that you change the password of the administrator for the protection of the security of personal information. Do not

leave 000000 as the default password. Make sure that you keep your password and write it down in a safe place so that you do not forget it.

Basic Connection Overview

Connect audio amplifier.

Connect PTZ cameras, DVRs or keypads

(optional).

Connect BNC type monitor (SPOT).

Connect HDMI type monitor (MAIN or SPOT).

Connect the alarm (relay)

Connect the coaxial-type

cameras

Connect audio (line input).

Connect power cord.

Connect an external USB device for

backup or playback.

Connect a mouse device.

Connect VGA monitor.

Connect the Monitor, DVR, VCR, or others.

Connect alarm sensors.

Connect the external SATA device.

Connect network cable for client control

or IP camera input.

Connect ATM/POS unit.

*MFL69441508*