Texas Instruments DRV2700EVM User Manual
Download Operation & user’s manual of Texas Instruments DRV2700EVM Motherboard for Free or View it Online on All-Guides.com.
Brand: Texas Instruments
Category: Motherboard
Type: Operation & user’s manual for Texas Instruments DRV2700EVM
Pages: 35
Download Texas Instruments DRV2700EVM Operation & user’s manual
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
1
SLOU403C–March 2015–Revised June 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
DRV2700EVM High Voltage Piezo Driver Evaluation Kit
User's Guide
SLOU403C–March 2015–Revised June 2018
DRV2700EVM High Voltage Piezo Driver Evaluation Kit
The DRV2700 is a single-chip, high-voltage piezo driver with an integrated 105-V boost switch, integrated
power diode, and integrated fully differential amplifier. This evaluation kit demonstrates:
• Multiple input modes including: 0- to 10-V single ended, PWM, and AC input modes
• Multiple output modes including: 0- to 200-Vpp differential, 0- to 105-V single and multiple ended
• 2 power supply inputs to isolate power consumption on DRV2700
• 8 convenient boost voltage settings and 4 different gain settings
• Small footprint (9 mm x 13 mm)
• Breakout for usage as a boost converter
The evaluation kit is designed for all-around use and can be used not only for evaluation but can also be
used for prototyping into systems. The EVM also contains a microcontroller, LDO (3.3 V) and LEDs for
status and input settings.
Evaluation Kit Contents:
• DRV2700EVM evaluation board
• Demonstration mode firmware preloaded onto microcontroller
• Downloadable software to control EVM
• Mini-B USB cable
Needed for programming and advanced configuration:
• Code Composer Studio™ (CCS) or IAR Embedded Workbench IDE for MSP430
• MSP430 LaunchPad™ (MSP-EXP430G2) or MSP430-FET430UIF hardware programming tool
• DRV2700EVM firmware available on the DRV2700EVM tool folder
• MSP-JTAG2SBW JTAG to Spy-Bi-Wire adapter