• Home
• Brands
• Motorola Manuals
• Motorola MK4000 MicroKiosk
• Motorola MK500 Quick Reference Manual

Motorola MK500 Quick Reference Manual

Download Quick reference manual of Motorola MK4000 MicroKiosk Barcode Reader, Touch terminals for Free or View it Online on All-Guides.com.

1

2

MK500/4000

Quick Reference Guide

© 2010 MOTOROLA, INC. All rights reserved.

Motorola reserves the right to make changes to any product to improve reliability,

function, or design.

Motorola does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.

No license is granted, either expressly or by implication, estoppel, or otherwise under

any patent right or patent, covering or relating to any combination, system, apparatus,

machine, material, method, or process in which Motorola products might be used. An

implied license exists only for equipment, circuits, and subsystems contained in

Motorola products.

Warranty

For the complete Motorola hardware product warranty statement, go to:

http://www.motorola.com/enterprisemobility/warranty

.

Motorola, Inc.

One Motorola Plaza

Holtsville, New York 11742, USA

1-800-927-9626

http://www.motorola.com/enterprisemobility

MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are

registered in the U.S. Patent and Trademark Office. All other product or service

names are the property of their respective owners.

© Motorola, Inc. 2010

72-132386-01 Revision B — August 2010

Health and Safety Recommendations

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the

recommendations below. Consult with your local Health & Safety Manager to ensure

that you are adhering to your company's safety programs to prevent employee injury.

•

Reduce or eliminate repetitive motion

•

Maintain a natural position

•

Reduce or eliminate excessive force

•

Keep objects that are used frequently within easy reach

•

Perform tasks at correct heights

•

Reduce or eliminate vibration

•

Reduce or eliminate direct pressure

•

Provide adjustable workstations

•

Provide adequate clearance

•

Provide a suitable working environment

•

Improve work procedures.

Regulatory Information

This device is approved under the Symbol Technologies brand: Symbol Technologies,

Inc., is the Enterprise Mobility business of Motorola, Inc. ("Motorola").

This guide applies to the following Model Numbers: MK4900, MK4000, MK590, MK500

All Motorola/Symbol devices are designed to be compliant with rules and regulations in

locations they are sold and will be labeled as required.

Local language translations are available at the following website:

http://www.motorola.com/enterprisemobility/support

Any changes or modifications to Motorola/Symbol Technologies equipment, not

expressly approved by Motorola/Symbol Technologies, could void the user's authority to

operate the equipment.

Only use Motorola/Symbol approved and UL Listed accessories.

All components must be dry before connecting to an external power source.

Maximum operating temperature: 104

o

F / 40

o

C

Radio Modules

The device contains approved radio module(s). These module(s) are identified below.

Motorola/Symbol SDIO Radio module with 802.11a/b/g Wireless LAN,

Type(s): 21-92955

Wireless Device Country Approvals

Regulatory markings, subject to certification, are applied to the device signifying the

radio(s) is/are approved for use in the following countries: United States, Canada,

Japan, China, S. Korea, Australia, and Europe 1,2.

Please refer to the Symbol Declaration of Conformity (DoC) for details of other country

markings. This is available at http://www.motorola.com/doc

.

Note 1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria,

Czech Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.

Operation of the device without regulatory approval is illegal.

Country Roaming - Note for Client / Mobile devices

This device incorporates the International Roaming feature (IEEE802.11d) which will

ensure the product operates on the correct channels for the particular country of use.

Ad-Hoc Operation - 802.11a Terminal Devices and Radio Modules only

Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is

restricted to Indoor Use Only, any other use will make the operation of this device illegal.

Frequency of Operation - FCC and IC

The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250

MHz band is restricted to Indoor Use Only; any other use will make the operation of this

device illegal.

The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The

range of channels is limited by firmware.

Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless

devices.

Potentially Hazardous Atmospheres - Fixed Installations

You are reminded of the need to observe restrictions on the use of radio devices in fuel

depots, chemical plants etc. and areas where the air contains chemicals or particles

(such as grain, dust, or metal powders).

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical

equipement.

Wireless devices should be switched off wherever you are requested to do so in

hospitals, clinics or healthcare facilitlies. These requests are designed to prevent

possible interference with sensitive medical equipement.

Wireless devices transmit radio frequency energy and may affect medical electrical

equipment. When installed adjacent to other equipment, it is advised to verify that the

adjacent equipment is not adversely affected.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be

maintained between a handheld wireless device and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with

independent research and recommendations by Wireless Technology Research.

Persons with pacemakers:

•

Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker

when turned ON.

•

Should not carry the device in a breast pocket.

•

Should use the ear furthest from the pacemaker to minimise the potential for

interference.

•

If you have any reason to suspect that interference is taking place, turn OFF your

device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if

the operation of your wireless product may interfere with the medical device.

This device is not HAC compliant during Voice-Over-IP (VOIP) calls.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human

exposure to electromagnetic fields from radio devices. For information on

"International" human exposure to eletromagnic fields refer to the Motorola/Symbol

Declaration of Conformity (DoC) at http://www.motorola.com/doc

.

EU

Remote and Standalone Antenna Configurations

To comply with EU RF exposure requirements, antennas that are mounted externally at

remote locations or operating near users at stand-alone desktop of similar

configurations must operate with a minimum separation distance of 20 cm from all

persons.

US and Canada

Co-located statement

To comply with FCC RF exposure compliance requirement, the antenna used for this

transmitter must not be co-located or operating in conjunction with any other transmitter/

antenna except those already approved in this filling.

Remote and Standalone Antenna Configurations

To satisfy FCC RF exposure requirements, a mobile transmitting device must operate

with a minimum separation distance of 20 cm or more from a person's body.

Laser Devices

Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant

to Laser Notice No. 50, dated June 24, 2007 and EN60825-1:2007 and

IEC 60825-1(ED.2).

The laser classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended

purpose. The following statement is required to comply with US and international

regulations:

Caution: Use of controls, adjustments or performance of procedures other than those

specified herein may result in hazardous laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As with any very bright light

source, such as the sun, the user should avoid staring directly into the light beam.

Momentary exposure to a Class 2 laser is not known to be harmful.

Scanner Labeling

Power Supply

MK500: Use ONLY a LISTED Motorola, Type no. 50-14000 (24Vdc/ 625mA minimum),

or PWRS-14000 (24Vdc/ 625mA minimum), Direct Plug-In Power supply, marked Class

2 or LPS (IEC60950-1, SELV). Use of alternative Power Supply will invalidate any

approvals given to this unit and may be dangerous.

MK4000: Use ONLY a LISTED Motorola, Type no. 50-14000 (24Vdc/ 1.5A minimum), or

PWRS-14000 (24Vdc/ 1.5A minimum), Direct Plug-In Power supply, marked Class 2 or

LPS (IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals

given to this unit and may be dangerous.

Power-over-Ethernet (PoE)

MK500: Use only with approved limited power source 48 VDC, 312.5 mA.

MK4000: Use only with approved limited power source 48 VDC, 0.625A.

MK500: When using PoE, you must place a ferrite core (Motorola p/n 34.10P16.001) on

the Ethernet cable as follows:

1. Open the ferrite core and place it on the cable.

2. Route the cable outside the ferrite core once and then close the ferrite core.

Radio Frequency Interference Requirements-FCC

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna

•

Increase the separation between the equipment and receiver

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

•

Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

For RLAN Devices:

The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:

•

Restricted Band 5.60 - 5.65 GHz

This device complies with RSS 210 of Industry & Science Canada. Operation is subject

to the following two conditions: (1) this device may not cause harmful interference and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

ᖿ٠ᘿ୴!

֎ऴီ٠ޔ!3ᣊᖿ٠ข঴

MK4000

MK500