Samsung Verizon SLS-BU103 Quick Start Manual

Download Quick start manual of Samsung Verizon SLS-BU103 Extender for Free or View it Online on All-Guides.com.

Samsung Verizon SLS-BU103 Quick start manual - Page 1
1
Samsung Verizon SLS-BU103 Quick start manual - Page 2
2
Starting Up…
Welcome
4G LTE
Verizon 4G LTE
4G LTE
In Service
For More Informaon
• For the latest documentaon, addional troubleshoong steps, or to learn more about advanced sengs and the
device’s web interface, find the downloadable User Guide at
www.verizonwireless.com/support/4g-lte-network-extender/.
• Or call customer support toll free at 800-922-0204.
What if my Display sll shows “Searching for GPS” aer one hour?
If necessary, use the included 23’ GPS extension cable, so that the GPS antenna can be placed as close to a window as
possible. Follow the steps below to aach the GPS extension cable.
1. Firmly press down on and slide the protecve cover as shown to expose the rectangular GPS antenna.
2. Pull the GPS antenna out and aach GPS extension cable and reaach GPS antenna in line.
3. Replace the GPS cover and place the GPS antenna in a new locaon close to a window.
Verizon 4G LTE
Network Extender
Quick Start Guide
Conrm your 4G LTE Network Extender in Service
Once the Network Extender is in service, your phone must be within 50 feet horizontally of the unit.
To verify your Verizon phones are connected to the Network Extender:
1. Ensure your Verizon Wireless 4G LTE mobile handset is enabled for Advanced Calling.
2. Dial #48 from your mobile phone and listen for the following confirmaon: “You are under 4G LTE Network
Extender coverage …“
3. Some phones may show a home icon.
Note: The range of the Network Extender is dependent on the strength of the exisng Verizon Wireless network
coverage. The use of this unit is recommended for areas where 1 bar or less is observed on your phone.
SLS-BU103 Version VSR 1.0
  
EP96-04526A Revision 4
Troubleshooting
Make a call on your 4G LTE Network Extender
When the Network Extender powers on, the Power / Status Indicator LED will be solid blue. During start-up and
self-configuraon, the LED will blink. Aer successful start-up, the LED will return to solid blue and the display
will show “In Service. Pressing the Buon next to the display will show addional informaon about your
Network Extender.
What if my display sll shows ‘Connecng to the Verizon Network’ aer one hour?
You may have to change the sengs on your router. Please refer to the Troubleshoong secon of the User Guide before
calling Verizon or go to www.verizonwireless.com/support/network-extender-router-configuraon/
Item
Specification
Manufacturer
Futaba
Model Type.
ELW0901AA
Resolution
128 x 36
Pixel Pitch
0.17 x 0.17 mm
Active Area
21.734 x 6.095 mm
Glass Size
25.28 x 9.9 mm
IC
LD7032
Color of Illumination
White
Gray Scale
2
Luminance
500 cd/m
2
Circular Polarizer (CPL)
Without CPL
Drive Method
Passive Matrix
Power Supply Voltage
13V/1.8V (Typ.)
Mass
0.64±0.4g
LCD Icons
Display Example
Power
/Status
Indicator
Device Display
Verizon
4G LTE
Verizon
4G LTE
GPS Indicator Call Indicator
Item
Specification
Manufacturer
Futaba
Model Type.
ELW0901AA
Resolution
128 x 36
Pixel Pitch
0.17 x 0.17 mm
Active Area
21.734 x 6.095 mm
Glass Size
25.28 x 9.9 mm
IC
LD7032
Color of Illumination
White
Gray Scale
2
Luminance
500 cd/m
2
Circular Polarizer (CPL)
Without CPL
Drive Method
Passive Matrix
Power Supply Voltage
13V/1.8V (Typ.)
Mass
0.64±0.4g
LCD Icons
Display Example
Power
/Status
Indicator
Device Display
Verizon
4G LTE
Verizon
4G LTE
GPS Indicator Call Indicator