Samsung SHP-DS705 User Manual

Download Operation & user’s manual of Samsung SHP-DS705 Door locks for Free or View it Online on All-Guides.com.

Samsung SHP-DS705 Operation & user’s manual - Page 1
1
Samsung SHP-DS705 Operation & user’s manual - Page 2
2
Built-in
Wireless Module
(Optional)
Battery Cover
Battery Holder
Deadbolt
OPEN Button
Manual knob
Open-door sensor
1.5V AA Batteries
Registration Button
654
3
SHP-DS705
2
The product components used may vary depending on the installation
environment.
Key Tag (For B2C Only) (2EA)
User Manual
Product Warranty
‘AA’ Batteries (LR6) (4EA)
Installation Paper
Installation Screws
Spacer
Silent Mode
All registration and settings operate only when the door opens.
Before entering the password, press the [ ] button and enter the password, then both
the sound of the key entering and the door opening will be suspended. It is a useful
function if you do not want to disturb neighbors when you go in and out at night.
When the door is locked, press
the [OPEN] button on the Inner
Body to open the door.
When the door is locked, press
the [OPEN] button on the Inner
Body to open the door.
Open the battery cover of the
inner body and briefly press
the [Register] button.
When the number pad is lighted,
enter the password and then
press the [ ] button.
The door is automatically locked 1 seconds after the door is closed.
When the door is locked, turn the
[Manual knob] in the direction of
[ ] to open the door.
When the door is locked, turn the
[Manual knob] in the direction of
[ ] to lock the door.
Place the card or key tag
on the card reader.
The door will be opened
after 1 second.
Outer Body Part
Inner Body Parts
Card and Key Tag Registration
Opening the Door from the Inside
Closing the Door from the Inside
Product Components
USER MANUAL
Placing the Card or Key Tag on the Card Reader
When the welcome function is deactivated, touch the number pad and
place the card to open the door.
Note
Download sHome Doorlock from App Store / Google Play Store.
For the more information about registering, please refer the
description of application use.
Up to
eight
compatible smart phones can be paired.
To pair multiple smart phones, turn off the Bluetooth of a paired
smart phone, and pair another smart phone.
If a registered Bluetooth enabled smart phone is lost or repaired,
your registration information cannot be deleted from the door lock.
It is recommend that the door lock should be initialized. (Refer page 7)
Please check support smart phone model on the web page.
When a new card or key tag is registered, those already registered are not deleted
but additionally registered. If you do not want to register the existing card, delete
all cards and register a new card. Up to 20 cards, including the key tag, can be
registered.(Only ISO14443 A Type is available.)

Opening the Door from Outside with a Card or Key Tag
The door can be opened from outside using a card or key tag.
Place the registered card or key tag on the card reader.
Automatic Locking Setting
1. Pressing the [Register] Button
Place the card or key tag
to be registered on the
card reader of the outer body.
To terminate registration,
press the [Registration] button.
3. Placing the Card or Key Tag
on the Card Reader
2. Entering the Password
4. Registration Done
Manual Locking Setting
Entry Complete /
Silent Mode Switch Button
Proximity Sensor
Number Pad
Battery Replacement
Time Alert
Away Security Setup
Card Reader
Reset Switch
External Power
Contact Port
65
PTSP2240ONTA ED:01
www.samsungsds-nss.com/en
Outer Body Inner Body Strike Fastening
Panel
Installation Jig
(Bracket)
Pairing with your Smart phone
OR
OR
To register multiple cards or key tags, lightly place another card or key
tag on the card reader within 20 seconds after registering the previous
card or key tag.
To make sure the card and key tag has been properly registered,
and close the door.
Please, be aware that the only provided card and key tag by Samsung
SDS Co. Ltd. shall work properly on the regular use for this door lock.
Pairing with your
Smart phone
Conveniently open the door through the
Bluetooth function of a smart phone.
Welcome Mode
When a user gets close to the door lock,
The authorization standby mode will
Automatically activate.
Silent Mode
When going in or out, the sound of
the key entering and door opening
will be suspended.
Double Security
Security check with the card and the password
can be optionally applied.
At-home Security
When someone is inside the house,
authorization for entry from the outside
will be prohibited.
High temperature Detection
Generates alarm in case of a fire
Using the Emergency Battery
Using the Emergency Battery
DING DONG DENG DONG
DING DONG DENG DONG
DING DONG
Success:
DING DONG DENG
DING DING
Fail:
DING DONG DING DONG
DING DONG DENG
DING DONG DENG
Success:
DING DONG DENG DONG
Fail:
DING DONG DING DONG
When approached the door lock (When applying the "welcome function")
or if the number pad is touched, a lighting will appear on the number pad.
When approached the door lock (When applying the "welcome function")
or if the number pad is touched, a lighting will appear on the number pad.
Touching [Number
Pad]will light up the
number pad.
Opening the Door from Outside with a Password
2. Common Mode
Password must be entered after the light is on, and if does not, touch
[Number Pad] and re-enter.
To cancel, press [ ] button and re-enter.
If the password is wrong 5 times, “peep” warning alarm will sound 20
times and the system will shut-down for about 3 minutes. When
malfunction happens, “beep” will sound every 10 seconds, and stop
mode will be turned off automatically after 3 minutes with multiple ‘beeps’.
Note
When purchased, the product is set to Randomizer mode initially.
1. Randomizer Mode
When two Random buttons are
lighted, press the buttons in order.
When the numbers on the number
pad are lighted, enter the password
and press the [ ] button.
Success:
DING DONG DENG DONG
Fail:
DING DONG DING DONG
Enter the password when the number pad
is lighted, and press the [ ] button.
Success:
DING DONG DENG DONG
Fail:
DING DONG DING DONG
Note
Warning
( page)
3
( page)
4
( page)
5
( page)
6
( page)
7
( page)
8
( page)
9
Setting guide
( , page)
10 11
Note
Warning
The password can be 4~12 digits number. Only one password can be registered.
The initial password is set to ‘1234’.
Password Register/ Change
1. Pressing the [Register] Button
3. Entering a New Password
2. Entering the Current Password
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
Enter the new password (4 to 12 digits)
and then press the [ ] button.
When the number pad is lighted, enter the
current password(‘1234’ after initialization)
and then press the [ ] button.
Success:
DING DONG DENG
DING DING
Fail:
DING DONG DING DONG
DING DONG DENG
To prevent an intrusion, it is recommended to make a password with
6 or more digits (from 0 to 9 can be set).
A registered password cannot be deleted. Register a new password.
Manage your password with care so that unauthorized people will not
have access to it. Regularly changing your password can reduce the
risk of it being leaked.
Warning
The factory defaults are set with the welcome mode on and the
one-minute alarm function off.
The working distance of the infrared sensor can differ depending on
light conditions and other environments. When the front door is exposed
to sun light or constant bright lights it is advised to limit the usage of the
sensor as it might sound the alarm.
Welcome mode on: The mode will automatically activate the authorization standby
mode when a user approaches the door lock.
Welcome mode off: The mode will activate the authorization standby mode when
user touches the number pad.
One-minute alarm function on / off: When someone remains in front of the door lock
for more than a minute, this mode will sound the tamper prevention alarm.
The Welcome mode is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
Welcome Mode
Double Security mode requires both card and password to open the door,
ensuring more security. To setup the Double Security mode, more than
1 card must be registered.
Double Security
Warning
Success:
DING DONG DENG
Fail:
DING DONG DING DONG
Touching
[Number Pad].
Enter the password when
the number pad is lighted,
and press the [ ] button.
Place the card on to the [Card
Reader]. If the authentication is
successful, the door will open.
Take your card when going out after the Double Security mode is set.
You cannot open the door if there is no card.
Fail:
Success:
DING DONG DENG DONG
DING DONG DING DONG