Polycom RMX 2000 Installation & Quick Start Manual

Download Installation & quick start manual of Polycom RMX 2000 Server for Free or View it Online on All-Guides.com.

Brand: Polycom

Category: Server

Type: Installation & quick start manual for Polycom RMX 2000

Pages: 2

Download Polycom RMX 2000 Installation & quick start manual

Polycom RMX 2000 Installation & quick start manual - Page 1
1
Polycom RMX 2000 Installation & quick start manual - Page 2
2
Installation Quick Start Guide for RMX 2000
Basic Setup
>> Connect the cables to the rear panel of the RMX 2000 as described below:
Configuring the LAN Properties on the USB Key
1 Insert the USB key provided with your system into the PC workstation.
The Polycom Documentation window opens.
In Windows XP:
a The Polycom Documentation option is automatically selected. Click OK.
In Windows 7:
a Select Open Folder to view files using Windows Explorer.
b Double-click the index.hta file.
The Language Menu opens.
2 Select the documentation language.
3 In the License Agreement window, click the Accept Agreement button.
4 In the Initial Setup Utility, click the RMX Lan Configuration Utility hyperlink.
The LanConfigUtility dialog box opens.
5 Modify the parameters in the utility’s dialog box using the information supplied by
your network administrator.
6 Click OK.
7 Remove the USB Key from the PC.
First-time Power-up and Connection to MCU
1 Insert the USB Key containing the modified IP addresses in the USB port on the
RMX’s back panel.
2 Power the RMX ON. The FAN STATUS and PWR STATUS LEDs turn ON.
System power-up sequence may take approximately 10 minutes.
During this time, the parameters in the lan.cfg file are uploaded from the USB key
to the RMX’s memory and applied during the power-up sequence.
Wait for the upload process to complete. Initially all the ERR/RDY/ACT LEDs
flicker and flash. Upload is completed when all the LEDs turn off and only the red
ERR LED (on the CTNL unit) remains ON.
It remains ON until the Default IP Network Service is configured.
3
4 Once the RMX Welcome screen is displayed, remove the USB key from the RMX.
5
6 .
The Media card ERR/RDY/ACT LEDs flicker, until only the RDY LED turns ON.
Before installing the RMX 2000 and performing the Basic Setup, please read the
General Safety Precautions described in the Polycom RMX 2000 Hardware Guide.
If your system package includes the RTM ISDN card, it is recommended to install it
before mounting the RMX on the rack. Refer to the RMX 1500/2000/4000 Getting
Started Guide for Installation instructions.
Do not remove the protective plastic caps from LAN1, LAN3 and ShMG ports.
RMX 2000
FAN
STATUS
CNTL
CNTL
MPM+80
MPM+80
PWR
STATUS
PWR
FANS
ERR RDY
ACT
HD
HS
ERR RDY ACT HS
HSERR RDY ACT
Media Cards & LEDs Fan Drawer
Power Supply Drawer
Control Unit
& LEDs
USB Ports - not for
customer use
Optional CPU &
LEDs
Fan &
Power
Status
LEDs
Front
Panel
LAN 2 Connection
Power
Cable
Off/On
Switch
E1/T1 Connections
(Optional if RTM ISDN
card is installed)
Rear
Panel
In the browser, enter the IP address of the RMX Control Unit and press Enter.
Enter POLYCOM.
Enter POLYCOM.
Click Login.
Click to connect to Polycom
web site and register the RMX.
Click Product Registration
and follow the on screen
instructions to obtain the
Product Activation Key.
Enter or paste the Product
Activation Key obtained.
Click OK.
RMX
®
2000
1
DOC2665A