Omega DP41-B Operation Manual
Download Operation manual of Omega DP41-B Series Measuring Instruments for Free or View it Online on All-Guides.com.
Brand: Omega
Category: Measuring Instruments
Type: Operation manual for Omega DP41-B Series
Pages: 2
1
2
DP41-B
Isolated Analog Output Option
Servicing North America:
USA: One Omega Drive, P.O. Box 4047
ISO 9001 Certified Stamford CT 06907-0047
TEL: (203) 359-1660 FAX: (203) 359-7700
e-mail: [email protected]
Canada:
976 Bergar
Laval (Quebec) H7L 5A1
TEL: (514) 856-6928 FAX: (514) 856-6886
e-mail: [email protected]
For immediate technical or application assistance:
USA and Canada: Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
®
Customer Service: 1-800-622-2378 / 1-800-622-BEST
®
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN
®
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA
Mexico and TEL: (001)800-TC-OMEGA
®
FAX: (001) 203-359-7807
Latin American: En Espa
ñol: (001) 203-359-7803
e-mail: [email protected]
Servicing Europe:
Benelux: Postbus 8034, 1180 LA Amstelveen, The Netherlands
TEL: +31 20 3472121 FAX: +31 20 6434643
Toll Free in Benelux: 0800 0993344
e-mail: [email protected]
Czech Republic:
Rudé armády 1868, 733 01 Karviná 8
TEL: +420 69 6311899 FAX: +420 69 6311114
e-mail: [email protected]
France:
11, rue Jacques Cartier, 78280 Guyancourt
TEL: +33 1 61 37 29 00 FAX: +33 1 30 57 54 27
Toll Free in France: 0800 466 342
e-mail: [email protected]
Germany/Austria: Daimlerstrasse 26, D-75392 Deckenpfronn, Germany
TEL: +49 7056 9398-0 FAX: +49 7056 9398-29
Toll Free in Germany: 0800 639 7678
e-mail: [email protected]
United Kingdom:
One Omega Drive
ISO 9002 Certified River Bend Technology Centre
Northbank, Irlam Manchester M44 5BD United Kingdom
TEL: +44 161 777 6611 FAX: +44 161 777 6622
Toll Free in England: 0800 488 488
e-mail: [email protected]
OMEGAnet
®
On-Line Service
www.omega.com
Internet e-mail
®
®
M2548/0802
WARRANTY/DISCLAIMER
OMEGA ENGINEERING, INC. warrants this unit to be free of defects in
materials and workmanship for a period of one (1) year from the date of
purchase. In addition to OMEGA’s standard warranty period, OMEGA
Engineering will extend the warranty period for four (4) additional years if the
warranty card enclosed with each instrument is returned to OMEGA.
If the unit malfunctions, it must be returned to the factory for evaluation.
OMEGA’s Customer Service Department will issue an Authorized Return (AR)
number immediately upon phone or written request. Upon examination by
OMEGA, if the unit is found to be defective, it will be repaired or replaced at
no charge. OMEGA’s WARRANTY does not apply to defects resulting from
any action of the purchaser, including but not limited to mishandling, improper
interfacing, operation outside of design limits, improper repair, or unauthorized
modification. This WARRANTY is VOID if the unit shows evidence of having
been tampered with or shows evidence of having been damaged as a result of
excessive corrosion; or current, heat, moisture or vibration; improper
specification; misapplication; misuse or other operating conditions outside of
OMEGA’s control. Components which wear are not warranted, including but
not limited to contact points, fuses, and triacs.
OMEGA is pleased to offer suggestions on the use of its various
products. However, OMEGA neither assumes responsibility for any
omissions or errors nor assumes liability for any damages that result
from the use of its products in accordance with information provided by
OMEGA, either verbal or written. OMEGA warrants only that the parts
manufactured by it will be as specified and free of defects. OMEGA
MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND
WHATSOEVER, EXPRESS OR IMPLIED, EXCEPT THAT OF TITLE, AND
ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of
purchaser set forth herein are exclusive, and the total liability of OMEGA
with respect to this order, whether based on contract, warranty,
negligence, indemnification, strict liability or otherwise, shall not exceed
the purchase price of the component upon which liability is based. In no
event shall OMEGA be liable for consequential, incidental or special
damages.
CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor
shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in
or with any nuclear installation or activity; or (2) in medical applications or used
on humans. Should any Product(s) be used in or with any nuclear installation
or activity, medical application, used on humans, or misused in any way,
OMEGA assumes no responsibility as set forth in our basic
WARRANTY/DISCLAIMER language, and, additionally, purchaser will
indemnify OMEGA and hold OMEGA harmless from any liability or damage
whatsoever arising out of the use of the Product(s) in such a manner.
RETURN REQUESTS / INQUIRIES
Direct all warranty and repair requests/inquiries to the OMEGA Customer Service
Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA,
PURCHASER MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER
FROM OMEGA’S CUSTOMER SERVICE DEPARTMENT (IN ORDER TO
AVOID PROCESSING DELAYS). The assigned AR number should then be
marked on the outside of the return package and on any correspondence.
The purchaser is responsible for shipping charges, freight, insurance and
proper packaging to prevent breakage in transit.
FOR W
ARRANTY RETURNS, please
have the following information
available BEFORE
contacting OMEGA:
1. P.O. number under which the
product was PURCHASED,
2. Model and serial number of the
product under warranty, and
3. Repair instructions and/or specific
problems relative to the product.
FOR NON-W
ARRANTY
REPAIRS,
consult OMEGA for current repair
charges. Have the following
information available BEFORE
contacting OMEGA:
1. P.O. number to cover the COST of
the repair,
2. Model and serial number of product,
and
3. Repair instructions and/or specific
problems relative to the product.
OMEGA’s policy is to make running changes, not model changes, whenever
an improvement is possible. This affords our customers the latest in
technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 2002 OMEGA ENGINEERING, INC. All rights reserved. This
document may not be copied, photocopied, reproduced, translated, or reduced
to any electronic medium or machine-readable form, in whole or in part,
without prior written consent of OMEGA ENGINEERING, INC.
PATENT AND TRADEMARK NOTICE: This product is covered by one or
more of the following patents: U.S. Pat. No. Des. 336,895; 5,274,577;
6,243,021 / CANADA 2052599; 2052600 / ITALY 1249456; 1250938 /
GERMANY DE 41 34398 C2 / SPAIN 2039150; 2048066 / UK Patent No. GB2
249 837; GB2 248 954 / FRANCE BREVET NO. 91 12756. The “Meter Bezel
Design” is a trademark of Newport Electronics, Inc. USED UNDER LICENSE.
Other U.S. and International Patents pending or applied for.
USA
MADE
IN
5 6
SETTING OUTPUT SCALE AND OFFSET (continued)
Out 1 (OUTPUT 1)
Press ‘RESET/ENTER’ 14)
Display flashes 1st digit of
previous "OUt 1" value.
Press ‘/MAX’ & ‘
/MIN’ 15) Enter "OUt 1" value.
(Example 0000.00).
Press ‘RESET/ENTER’ 16) Display advances to
"REAd 2" Reading 2 menu.
REAd 2 (READING 2)
Press ‘RESET/ENTER’ 17)
Display flashes 1st digit
of previous "Reading 2" value.
Press ‘/MAX’ & ‘
/MIN’ 18) Enter "Reading 2” value.
(Example 999999).
Press ‘RESET/ENTER’ 19) Display advances to
"OUt 2" Output 2 menu.
Out 2 (OUTPUT 2)
Press ‘RESET/ENTER’ 20)
Display flashes 1st digit of
previous "OUt 2" value.
Press ‘/MAX’ & ‘
/MIN’ 21) Enter "OUt 2" value.
(Example 0010.00).
Press ‘RESET/ENTER’ 22)
Display Display shows
"StOREd" stored message
momentarily and then advances
to the "SP CNF" SetPoint
Configuration menu.
The above example is for 0-10 V of the entire
range of the process input and analog output. For
0-20mA output you need to set "MOdE" to "CURRNt"
DC-Current output and "OUt 2" to 0020.00.
SPECIFICATIONS
Analog Output:
0-5 V, 1-5 V, 0-10 V, 0-20 mA, 4-20 mA level; 14-bit
resolution; 0.1% accuracy; 6 msec step response.
Isolation:
Power to Input / Analog, Comm, Ethernet, & Relay Output:
2500 Vac per 1 min. test
Relays to Inputs / Analog, Comm, & Ethernet Outputs:
2500 Vac per 1 min. test
Ethernet to Inputs / Analog Outputs:
1500 Vac per 1 min. test
Between Inputs / Analog & Comm Outputs:
500 Vac per 1 min. test
OPERATION MANUAL
CONFIGURING THE OUTPUT (continued)
MOdE
ENTER OUTPUT MODE CONFIGURATION SUBMENU:
Press ‘RESET/ENTER’ 5) Display shows " StOREd"
stored message momentarily
and advances to "MOdE" to
allow users to select Output
type as Voltage (0-10Vdc or
Current (4-20mA-dc) source.
Press ‘RESET/ENTER’ 6) Display flashes "VOLt"
(default) DC-Voltage output
option or previous selection
("CURRNt" DC-Current output).
Out.tyP
ENTER OUTPUT TYPE CONFIGURATION SUBMENU:
Press ‘RESET/ENTER’ 7) Display shows "OUt.tyP"
Output Type Submenu.
Press ‘RESET/ENTER’ 8) Display flashes "UNF ILt"
Unfiltered option or previous
selection.
Press ‘/MAX’ 9) Scroll though and select
the following options for your
choice of setting:
"UNF Ilt": Transmits the unfiltered value of your signal input.
"FILtRd" : Transmits the filtered value of your signal input.
"PEAk" : Transmits the recorded Peak "HI RdG" Reading
value(s).
or "VALLy" : Transmits the recorded Valley"LO RdG"
Reading value(s).
SETTING OUTPUT SCALE AND OFFSET
OT.SC.OF
ENTER OUTPUT SCALE & OFFSET
CONFIGURATION SUBMENU:
REAd 1 (READING 1)
Press ‘RESET/ENTER’ 10) Display shows "REAd 1"
Reading 1 menu.
Press ‘RESET/ENTER’ 11) Display flashes 1st digit of
previous "Reading 1" value.
Press ‘/MAX’ & ‘
/MIN’ 12) Enter "Reading 1" value.
(Example 000000).
Press ‘RESET/ENTER’ 13) Display advances to
"OUt 1" Output 1 menu.
Ot.SC.OF
(Output Scale & Offset)
REAd 1
value
OUt 1
value
REAd 2
value
OUt 2
value
FILtRd
(Filtered)
OUt.tyP
(Output Type)
UNFILt
(Unfiltered)
PEAk
VALLy
It is the policy of OMEGA to comply with all worldwide safety and EMC/EMI regulations
that apply. OMEGA is constantly pursuing certification of its products to the European New
Approach Directives. OMEGA will add the CE mark to every appropriate device upon
certification.
This device is marked with the international hazard symbol. It is important to read
the Setup Guide before installing or commissioning this device as it contains
important information relating to safety and EMC.
WARNING: These products are not designed for use in, and should not be used
for, patient connected applications.
The information contained in this document is believed to be correct but OMEGA
Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to
alter specifications without notice.
, omega.com
®
are trademarks of OMEGA Engineering, Inc.
®
RoHS 2 Compliant