• Home
• Brands
• Clinton Electronics Manuals
• Clinton Electronics CE-L07
• Clinton Electronics CE-L07 User Manual

Clinton Electronics CE-L07 User Manual

Download Operation & user’s manual of Clinton Electronics CE-L07 Monitor for Free or View it Online on All-Guides.com.

1

2

• KEEP THE PLASTIC PACKAGING OUT OF THE REACH OF CHILDREN. CHILDREN MAY SUFFOCATE. DO NOT INSTALL

THE PRODUCT WITHIN THE REACH OF YOUNG CHILDREN.

• DO NOT EXPOSE THE PRODUCT TO DIRECT SUNLIGHT, HEAT, OR A HOT OBJECT SUCH AS A STOVE. PRODUCT

LIFESPAN MAY BE REDUCED OR A FIRE MAY RESULT.

• DO NOT INSTALL THE PRODUCT IN A VEHICLE OR A PLACE EXPOSED TO DUST, MOISTURE (WATER DRIPS, ETC.),

OIL, OR SMOKE. A FIRE OR ELECTRIC SHOCK MAY RESULT.

2

3

1

Remove Protective Film

Peel o the protective film from the front of the LCD screen. You can also remove the plastic battery-retention-tab from the remote

control at this time if desired.

ITEMS INCLUDED

• Monitor

• AC-to-DC Power Supply (5’ Cord)

• 12V DC Automobile Power Supply (5‘ Cord)

• 12V Pigtail Adapter

• Remote Control

• 5’ Composite A/V Cable (BNC/RCA to 3.5mm)

• 5’ HDMI Cable

• Tilting Stand / Wall Mount

• Installation Guide

CE-L07 USER MANUAL

v.10.29.15*Information in this document is subject to change

MODE TCON VOL VOL MENU

SOURCE

LCD REMOTE

VIDEO

SELECT

MODE

SELECT

MENU

Attach Stand / Wall Mount

Lay the display face down on a clean, flat surface. Position

the narrow rounded end of the stand into the slot on the

back of the display. Using the included attachment screws,

screw the stand onto the display. Attach the square side of

the bracket to your mounting surface using appropriate

screws (not included).

Adjust Angle

The stand can be table mounted, or wall mounted flush.

To adjust, simply move the display to the desired

angle. The bracket has the correct tension to move by

hand without the need to tighten or loosen the nuts.