Bolens 11A-020W765 Fast Start Manual
Download Fast start manual of Bolens 11A-020W765 Lawn Mower for Free or View it Online on All-Guides.com.
1
2
3
4
WARNING: Read and understand all instruction,
warning, and danger labels.
Para instrucciones en Español, refiérase al Manual
del Operador.
Tools Required
• ⁄-inch wrench (or adjustable wrench)
• ⁄-inch wrench (or adjustable wrench)
• ⁄-inch wrench (or adjustable wrench)
• ⁄-inch wrench (or adjustable wrench)
• Flat-head screwdriver
Chute Deflector Assembly
NOTE: Use the hardware in Group 1 to complete the following
steps. Refer to your Operator’s Manual.
1. Align the holes on the chute deflector with the
corresponding holes on the deck surface.
2. Insert carriage screws up through the underside of the
deck and through the chute deflector. See Figure 3-1.
Figure 3-1
3. Secure each screw with a washer and lock nut.
Lower Handle Assembly
NOTE: Use the hardware in Groups 2 and 4 to complete the
following steps.
1. Lift the rear of the deck and place it on a block of wood to
secure it.
2. Place the lower handle over the deck and align the holes on
the deck with the corresponding holes on the handle.
3. Pivot the lower handle forward and secure it to the deck
using the hex screws, shoulder screws, and flange lock
nuts. See Figure 3-2.
Hex Screw
Shoulder
Screw
Figure 3-2
Upper Handle Assembly
NOTE: Use the hardware in Groups 2 and 4 to complete the
following steps. Refer to your Operator’s Manual.
1. Place the upper handle in position over the lower handle
keeping the blade control handle facing up.
2. Secure the upper handle to the lower handle using the
carriage bolts and lock nuts from Group 4 of the hardware
pack. See Figure 3-3.
Figure 3-3