Cisco Catalyst 5000 Series Installation And Configuration Note
Download Installation and configuration note of Cisco Catalyst 5000 Series Control Unit, Switch for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Control Unit , Switch
Type: Installation and configuration note for Cisco Catalyst 5000 Series
Pages: 30
Download Cisco Catalyst 5000 Series Installation and configuration note
1
Cisco Systems, Inc.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1999
Text Part Number:
Catalyst 5000 Series Route Switch
Feature Card Installation and
Configuration Note
Product Number
WS-F5541
This installation and configuration note contains procedures for installing and configuring the
Catalyst 5000 series Route Switch Feature Card (RSFC). The RSFC provides multiprotocol routing
for Catalyst LAN switches. The RSFC is a fully functional Cisco IOS router feature card available
on the Catalyst 5000 series Supervisor Engine II G (WS-X5540) and Supervisor Engine III G
(WS-X5550).
Note For information on installing the Supervisor Engine II G and III G, see the Catalyst 5000
Series Supervisor Engine Installation Guide publication.
Document Contents
This document contains the following sections:
• Specifications, page 2
• Functional Description, page 2
• Hardware and Software Requirements, page 6
• Safety Recommendations, page 6
• Removing and Replacing the Supervisor Engine, page 8
• Installing the RSFC, page 11
• Configuring InterVLAN Routing on the RSFC, page 12
• Configuring Redundancy Using HSRP, page 17
• Maintaining and Administering the RSFC, page 18
• RSFC Configuration Examples, page 23
• FCC Class A Compliance, page 28
78-6777-01 Rev. A1