Cisco GLC-FE100FX Maintenance And Troubleshooting Manual

Download Maintenance and troubleshooting manual of Cisco GLC-FE-100BX-D Control Unit, Network Hardware for Free or View it Online on All-Guides.com. This version of Cisco GLC-FE-100BX-D Manual compatible with such list of devices, as: GLC-FE-100BX-U, CWDM-SFP-1590, GLC-GE100FX, SFPGE-L, SFPGE-Z

Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 1
1
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 2
2
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 3
3
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 4
4
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 5
5
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 6
6
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 7
7
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 8
8
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 9
9
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 10
10
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 11
11
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 12
12
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 13
13
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 14
14
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 15
15
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 16
16
Cisco GLC-FE-100BX-D Maintenance and troubleshooting manual - Page 17
17
Products & Services
Cisco Small Form-Factor Pluggable (SFP) Transceiver Modules Maintenance
and Troubleshooting
Document ID: 72370
Introduction
This document provides information about the deployment and troubleshooting of Cisco Small Form-
Factor Pluggable (SFP) Transceiver Modules in Cisco Catalyst Switches. Cisco Transceiver Modules
support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing
platforms. Cisco pluggable transceivers offer a convenient and cost effective solution for the adoption in
data centers, campuses, metropolitan area access and ring networks, and storage area networks.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco SFP Transceiver Modules.
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Cisco SFP Transceiver Modules
Cisco Fast Ethernet SFP Modules
Cisco Gigabit Ethernet SFP Modules
Cisco CWDM Transceiver Modules
Supported Catalyst
Switches
Catalyst 6500/6000 Series
Catalyst 4500 Series
Catalyst 3750 Series
Catalyst 3750
-E Series
Catalyst 3560 Series
Catalyst 3560
-E Series
Catalyst 2970 Series
Catalyst 2960 Series
Catalyst 2950 Series
Catalyst 2948G Series
Catalyst 2940 Series
Catalyst Express 500 Series
Safety Guidelines
Laser Safety
Guidelines for Handling SFPs
Required Tools
Install and Remove SFP Transceiver
Modules
Types of SFP Transceiver Latches
Install a SFP Transceiver Module
Remove SFP Transceiver Modules
Cabling Specfications
Configure SFPs
Configure Interface Speed and Duplex
Mode
Use Third Party SFP Modules
Connect a SFP Module to a GBIC
Module
Troubleshoot
SFPs
The Link Does Not Come Up in the Sup720
Module with Line Cards WS-X6724-SFP and WS-
X6748-SFP, Even After a Reboot
The WS
-X6724-SFP Module with DFC3A Resets in Cisco Catalyst 6500 Switches That Run
Cisco IOS Software
Speeds Supported by the
1000BASE-T(GLC-T) SFP Module on the Cisco Catalyst 3750 Series
Switch
Use the 10
-Gigabit Ethernet and Gigabit Ethernet SFP Ports of a SupII+10GE or SupV-10GE in
a Catalyst 4500 Series Switch
SPF Ports of the WS
-X4506-GB-T Module or the WS-X4948 Chassis Do Not Come Up
SFP Interfaces of X2/Twin Gigabit
Converter Do Not Come Up
The
Links Do Not Come Up in Cisco 3800 Series Routers with SPFs for Connecting to Cisco
Catalyst Switches
Cisco Support Community
- Featured Conversations
Related Information