GE JVM6175EK Dimensions And Installation Information

Download Dimensions and installation information of GE JVM6175EK Microwave Oven for Free or View it Online on All-Guides.com.

Brand: GE

Category: Microwave Oven

Type: Dimensions and installation information

Model: GE JVM6175EK , GE JVM6175SK

Pages: 3

Download GE JVM6175EK Dimensions and installation information

GE JVM6175EK Dimensions and installation information - Page 1
1
GE JVM6175EK Dimensions and installation information - Page 2
2
GE JVM6175EK Dimensions and installation information - Page 3
3
Listed by
Underwriters
Laboratories
JVM6175SK/EK
GE Appliances 1.7 cu. ft. Over-the-Range Sensor Microwave Oven
Specification Created 2/16
105°
Door open
(without obstruction)
22-7/8
"
29-7/8"
16-1/2"
(rear)
15"
15-7/8"
13"
MAX.
12"
MIN.
66" MIN.
Mounting
height from
floor
Minimum distance from
door hinge side to
adjacent wall should
equal 1/2".
30" MIN.
width
required
Exhaust outlet
connects to
3-1/4"x 10" duct
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
Series, GE Profile
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
NOTE: Requires 120V grounded outlet. Electrical receptacle
must be located in cabinet above microwave oven. No
additional wiring, venting or cabinet rebuilding necessary in
many cases. Complete detailed, easy-to-follow installation
instructions and convenient full-size templates are packed
with the microwave oven.
IMPORTANT INFORMATION: When installing the
microwave oven over a range, allow minimum of 2" from
bottom of microwave oven to top of range backguard to allow
for removal of light covers.
VENTILATION OPTIONS: The microwave ovens are
designed for adaptation to the following three types of
ventilation:
-Outside exhaust (vertical – as shown)
-Outside exhaust (horizontal)
-Recirculating (non-vented ductless – see Filter Kit drawing)
INSTALLATION INFORMATION: This information is
not intended to be used for installing unit described. Before
installing, consult installation instructions packed with
product/kit for current dimensional data.