Apantac DA-8HD User Manual
Download Operation & user’s manual of Apantac DA-8HD Amplifier for Free or View it Online on All-Guides.com.
1
2
DA-8HD
USER MANUAL
1 x 8 Triple Rate
(3G/HD/SD-SDI)
Reclocking
Distribution
Amplifier
DA-8HD FRONT VIEW
1. Output 5 (ASI compatible)
2. Output 6 (Terminator should be ap-
plied when not in use)
3. Output 7 (ASI compatible)
4. Output 8 (Terminator should be ap-
plied when not in use)
5. SDI Input
1. Power Adapter Fastener
2. 5V 1A Power Input
3. Output 4 (Terminator should be applied
when not in use)
4. Output 3 (ASI compatible)
5. Output 2 (Terminator should be applied when
not in use)
6. Output 1 (ASI compatible)
1. Status Indicator - Turns Green when
powered on, turns amber when SDI
signal is locked on.
DA-8HD TOP VIEW
DA-8HD REAR VIEW
Troubleshooting Q & A
There is no image on my SDI mon-
itor.
If your source is 1080p, your monitor
may only support 1080i, but not
1080p.
There is no image on my SDI mon-
itor.
Check the color of the status indicator.
If it is green, it means there is power
but no input source is detected. Please
check your source. The status indica-
tor will turn amber if the source is
locked on.
There is no image on my SDI mon-
itor.
The length of your cable may too long.
DA-8HD is tested with Belden 1694A,
120 meters for 3G, 140 for HD-SDI.
© 2012 APANTAC LLC, All rights reserved
7556 SW BRIDGEPORT ROAD
PORTLAND, OR 97224, USA
PHONE +1 503 968 3000
FAX +1 503 389 7921
The content of this document is provided in connection
with Apantac LLC (“Apantac”) products. Apantac makes
no representation or warranties with respect to the accu-
racy or completeness of the contents of this publication
and reserves the right to make changes to specifications
and product descriptions at any time without notice.