AML LDX10 Quick Start Manual
Download Quick start manual of AML LDX10 Other, PDA for Free or View it Online on All-Guides.com.
1
2
Power Button
LDX10 Batch Data Collection Handheld
Quick-Start Guide
Getting StartedGetting Started Getting Started
Physical Features 24-key Keypad
1
Charge the LDX10 for 6 hours
2
Starting up the LDX10
3
Download DC Console
800.648.4452
www.amltd.com
01132017-1
Power and Reboot Procedures
Use the USB cable and the optional adapter
to charge from a 110VAC wall outlet.
Download the DC Console utility at
www.barcodepower.com
Scan Key
Power
Button
LCD
Scan Engine
Window
USB Port
T9 Keypad
Utilize DC Console to
quickly modify existing
applications or create
new ones and transfer
files from your LDX10 to
your PC.
• If left idle for 30 minutes, the LDX10 will automatically
power down.
• Pressing the power button briefly, while the unit is on,
will either put the LDX10 into suspend mode, or wake it up
depending on its current state.
• Pressing and holding the power button for more
than 3 seconds causes the LDX10 to power off.
• Pressing the power button while the
LDX10 is OFF powers up and
re-boots the unit.
• While charging, the LDX10 display
will go dark after a time set in the
‘Display Properties’ settings in
Windows® Control Panel. Touching
the screen or any key will awaken it
from this idle state.
Bottom
Top
Note: Microsoft ActiveSync works only with
Windows
®
XP or earlier.
Note: The Windows Mobile Device Center is only
supported on Windows Vista
™
or later.
IMPORTANT!
Users must install either Microsoft
®
ActiveSync
®
or Windows
®
Mobile Device Center
®
before
installing AML DC Console.