• Home
• Brands
• Airaid Manuals
• Airaid 450-330
• Airaid 450-330 Installation Instructions

Airaid 450-330 Installation Instructions

Download Installation instructions of Airaid 450-330 Other for Free or View it Online on All-Guides.com.

1

2

Installation Instructions

For Part Number:

450-330

2015-17 Ford Mustang 2.3l EcoBoost 4 Cyl.

ComponentIdentiication

1 AiraidPremiumFilter  1

2 AiraidIntakeTube   1

3TopPanel1

4BottomPanel1

5 FilterAdapter   1

6 Weatherstrip23"   1

7 ReducingCoupler   1

8HumpHose1

9 #40HoseClamp   1

10 #56HoseClamp   1

11 #68HoseClamp   2

12 AluminumFitting   1

13 #8FlatWasher   1

14 8‐32ButtonHead   1

15 13/16"IDGrommet   1

16O‐Ring1

17 ¼"‐20ButtonHead  4

18 1/4"FlatWasher   3

19 1/4‐20X1/2"LButtonHead 3

20Grommet1

21  ¼"LockWasher   4

22AiraidDecal1

1. Remove the battery box cover in the cowl and discon-

nect the negative battery terminal.

Full color instructions can be viewed on our web site at Airaid.com. If you need any assistance

please call 1-800-858-3333 to speak with a representative in our Customer Service Center before

returning the product.

2. Loosen the clamp on the intake tube and slide it off

of the airbox. Gently pry the harness anchor out of the

airbox and disconnect the air temp sensor.

Air temp sensor

Anchor

3. Remove the 6mm airbox mounting bolt in the inner

fender and lift the entire airbox assembly out of the vehi-

cle. Set the bolt aside for now. It is to be reused.

4. Be sure to retain speed clip in the inner fender .

5. Loosen the clamp on the turbo inlet coupler.

6. Disconnect the PCV and turbo bypass lines from the

intake tube and remove the tube from the vehicle.

9. Tilt the air temp sensor rearward so the locking tab

clears the ramp and rotate it counterclockwise 1/4 turn to

release it.

7. Insert the Grommet and Aluminum Fitting into the

Airaid Intake tube as shown.

8. Slide the Reducer and Clamps onto the turbo side of

the Intake Tube as shown. Leave the clamps loose for

now.

Fitting

Grommet

#40

#56

NOT LEGAL FOR SALE OR USE ON ANY POLLUTION CON-

TROLLED MOTOR VEHICLE IN CALIFORNIA OR STATES

ADOPTING CALIFORNIA EMISSION PROCEDURES.

See AIRAID.COM for CARB status on each part for a specific vehicle.