Yeastar Technology MyPBX SOHO User Manual
Download Operation & user’s manual of Yeastar Technology MyPBX-SOHO Gateway, PBX for Free or View it Online on All-Guides.com.
Brand: Yeastar Technology
Category: Gateway , PBX , Server , Wireless Access Point
Type: Operation & user’s manual for Yeastar Technology MyPBX-SOHO
Pages: 122
Download Yeastar Technology MyPBX-SOHO Operation & user’s manual
MyPBX SOHO User Manual
www.yeastar.com Page 16
5) Follow me (Call Forwarding)
Call forwarding for an extension can be configured here. The administrator can
configure Follow Me option for this extension. If you want to transfer the call to
an outbound number, please follow the dial pattern of outbound route filled in
the outbound number.
For example: transferring to your mobile phone number 123456789, the dial
pattern of outbound route is ‘9.’, you should fill in 9123456789 here.
6)Other Options
.Call Waiting
Check this option if the extension should have Call Waiting capability. If this
option is checked, the ‘When busy’ follow me options will not be available. The
call waiting function of IP phone has higher priority than MyPBX’s call waiting
function.
.DND
Don’t Disturb. When DND is enabled for an extension, the extension will be not
available.
.User Web Interface
Check this option to allow the user to login to the MyPBX User Web interface,
which can be used to check voicemail and extension recordings. Users may login
to MyPBX User Web interface by using their extension number and voicemail PIN
# as the login and password respectively.
.Ring Out
Check this option if you want to customize the ring time. Ring tone will stop over
the time defined.
7) VoIP Settings
·NAT
This setting should be used when the system is using a public IP address to
communicate with devices hidden behind a NAT device (such as a broadband
router). If you have one-way audio problems, you usually have problems with
your NAT configuration or your firewall's support of SIP and/or RTP ports.
·Qualify
Send check alive packets to IP phones
·SIP Transport
This will be the transport method used by the extension. The options are UDP
(default) or TCP or TLS.
·DTMF Mode – RFC2833, Info, Inband, Auto.