--------------------------------------------------------------------
README.TXT
ICP ICP9085LI/ICP5085BR SAS RAID Controller
ICP ICP9047MA/ICP9087MA SATA RAID Controller
ICP ICP9014RO/ICP9024RO SCSI RAID Controller
ICP ICP5805BL/ICP5045BL/ICP5085BL/ICP5125BR/ICP5165BR Unified Serial Controllers
as of September 14, 2007
--------------------------------------------------------------------
Please review this file for important information about issues
and erratas that were discovered after completion of the standard
product documentation. In the case of conflict between various
parts of the documentation set, this file contains the most
current information.
NOTE: The latest BIOS and documentation can be downloaded
from www.icp-vortex.com.when they become available.
The following information is available in this file:
1. Software and Documentation
1.1 Controller & Utility Software
1.2 Documentation on this CD
2. Installation Instructions
3. General Cautions
4. Known Limitations
4.1 Booting to a bootable CD
4.2 ICP9014RO/ ICP9024RO controllers
4.3 ICP9024RO controller
4.4 ICP9085LI controller
4.5 Using the controller in a Dell Precision 530
4.6 ACU utility
4.7 FreeBSD
4.8 ICP Storage Manager
4.9 ICP5085BR/ICP ICP5805BL/ICP5045BL/ICP5085BL/ICP5125BR/ICP5165BR
controllers
4.10 OpenServer 6.0
4.11 SAS and SATA controllers and Adaptec 335SAS enclosure
4.12 Using the ICP5085BR in a Gateway 920
4.13 Creating an Array from the ICP Storage Manager CD
4.14 Using the controller with an Adaptec S50 JBOD Enclosure
4.15 SMART errors on SATA controllers
4.16 Firmware upgrades
4.17 RAID 10/50/60 array leg limitations
4.18 Microsoft VDS Storage Manager LUN Error
4.19 ICP5085BR controller
4.20 UnixWare and OpenServer
4.21 SATA disks do not support Dual Path with Expanders
4.22 Usage of firmware, utilities and flash tools
4.23 DOS OS not supported
4.24 DAT drive restoration fails when spanning tapes
--------------------------------------------------------------------
1. Software and Documentation
1.1. Controller & Utility Software
