Okidata Microline 520 Service Handbook
Download Service handbook of OKIDATA Microline 520 Printer for Free or View it Online on All-Guides.com.
Brand: OKIDATA
Category: Printer
Type: Service handbook
Model: OKIDATA Microline 520 , OKIDATA Microline 521
Pages: 321
Serial Cable Information
The information in this section will help you make a serial cable to connect between the printer
and computer.
Refer to the computer documentation to determine the cable requirements on the computers end.
The printer has the following cable requirements.
• Shielded, RS-232C cable
• UL and CSA approved
• No more than 50 feet long
• Cannon DB-25P plug (or equivalent) with 25 pins
• Cannon DB-C2-J9 (or equivalent) connector shell
Serial Interface Signal Requirements
Pin Signal Symbol Direction Description
1 Protective Ground PG Ground Connected to the printer frame
2 Transmit Data TD From Printer Serial data transmitted to the system
3 Receive Data RD To Printer Serial data received by the printer
4 Request to Send RTS From Printer Always set to low (mark)
5 Not Used
6 Data Set Ready DSR To Printer Indicates that data can be sent
7 Signal Ground SG Ground Ground
8
to
10
Not Used
11 Supervisory Send Data SSD From Printer Indicates that the printer is not ready to
receive data
12
to
19
Not Used
20 Data Terminal Ready DTR From Printer Indicates that the printer is not ready to
receive data
21
to
25
Not Used
Failure Analysis 4 - 50 Microline 520/521 Service Handbook
P/N 59257803